New setup next fri

[Jam.]

Ok so im all done now

First some pics of leak testing.

And now for some finished shots. (apart from my cathodes)

Well thats all folks

Not muc of a build log but o well i was never a good writer... Or Photographer for that matter

 

[ShortAlieN]

looks like a nice clean build. nice work

 

[SieB]

That looks pretty good, the water block goes well with the Formula IV and looks like it's part of the motherboard. I don't like the RAM fans but each to their own, still looks good anyway.

 

[Jam.]

That looks pretty good, the water block goes well with the Formula IV and looks like it's part of the motherboard. I don't like the RAM fans but each to their own, still looks good anyway.

Me either normally but atm the moment the Domm heatsinks dont line up well, I had to remove them with my D-14.

So tomorrow i have a couple things to do... Stop the pump from rattling (only stops when at a 90 dregree angle on its side :/) and sort the ram sinks out so i can remove the fan because its noisy.

 

[MxFScotch]

Turned out nicely. Clean. Like the black veins. Im betting you enjoy the temps too. I know I did when I ran prime the first time. Congrats!

 

[sheroo]

Nice job, you have really got me thinking about wc now. I don't think that I'd want to wc my main rig - as I don't like tinkering with that too much, I just want it to work. But a pure wc tinkering only rig - another item on my to do list...

 

[CRAZYCAP]

coming together very nicely mate.

 

[Jam.]

So i have a tip for people who want to mount push pull in the HAF X, use some motherboard stand offs to attach to the Radiator then use some 3 x 30MM - 3/16" x 1/4" bolts to mount the fans to the stand offs. The stand off will be just thin enought to slide right through the holes of the HAF X mounting bar. This will keep all the fans nice and flush in the top of the case.

And heres a picture to demonstrate.

Also thanks for the kind words guys