Those little annoying F@H things ..

hmmblah said:
Finally have my i7 930 doing some decent PPD. It was averaging around 8000 PPD at 4GHz. I set both of my GPU console clients to use -advmethods. The top card was hitting 96C though, so I took off -advmethods on that card. With only one card doing -advmethods, my CPU PPD is now at around 15k, almost double!
Click to expand...

Nice. My PC is currently doing a 3200 point WU, which is taking an age. Will get about 24K points from that so it's all good.
 
hmmblah said:
Finally have my i7 930 doing some decent PPD. It was averaging around 8000 PPD at 4GHz. I set both of my GPU console clients to use -advmethods. The top card was hitting 96C though, so I took off -advmethods on that card. With only one card doing -advmethods, my CPU PPD is now at around 15k, almost double!
Click to expand...

Those -advmethods GPU units can really crank the heat up. Have you tired dropping the voltage a tiny bit on the GPU to see if its still stable?

My Asus 560 Ti is factory overclocked and the stock core voltage is 1.05, I can drop that to 1.012 and still be stable with the factory clocks.

The other 560 Ti I have is just an Inno3D card which looks to be reference and is already running at quite a low voltage 0.987 (I think).

Might be worth a look if it can get that card running -advmethods too
 
Not really a little problem,

as i just for the love of my muppet can't start the CPU and one of my GPU's, they just hang and do nothing
blink.gif


its that time again, that i finally getting up to my PPD and BOOM problems
nopity.gif


EDIT oo wait i think stanford servers are down ,

any one else having this problem ??

Checking stanford servers BRB.......

EDIT2 that's NOT it god%#!^^!@&@&
angry.gif
 
ExtremeBB said:
Not really a little problem,

as i just for the love of my muppet can't start the CPU and one of my GPU's, they just hang and do nothing
blink.gif


its that time again, that i finally getting up to my PPD and BOOM problems
nopity.gif


EDIT oo wait i think stanford servers are down ,

any one else having this problem ??

Checking stanford servers BRB.......

EDIT2 that's NOT it god%#!^^!@&@&
angry.gif
Click to expand...

Everything's going smoothly here now but I did have an SMP hang last night, simple pause & unpause fixed it.
 
It does seem i can't get new WU's as the work folders are empty,

i'll wait and hope i get something later , first training
smile.gif


Happy folding........
 
I'm not getting any units either. Getting continued:

18:03:13:WARNING: Failed to get assignment from 'assign3.stanford.edu:8080': Failed to connect to assign3.stanford.edu:8080: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.

18:03:13:Connecting to assign4.stanford.edu:80

18:03:13:WARNING: Failed to get assignment from 'assign-GPU.stanford.edu:80': Failed to connect to assign-GPU.stanford.edu:80: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.

18:03:13:Connecting to assign-GPU.stanford.edu:8080
Click to expand...

in my log file too. Also can't get onto http://www.stanford.edu at the moment, so guessing it's all down
sad.gif


Edit: Back up and running now.
 
finished a wu11020 during the night, and its been trying to send it to stanford for hours but it keeps failing.... arggg

it says

[13:17:18] + Attempting to send results [February 6 13:17:18 UTC]

[13:17:39] - Couldn't send HTTP request to server

[13:17:39] + Could not connect to Work Server (results)

[13:17:39] (171.64.65.55:8080)

[13:17:39] + Retrying using alternative port

[13:18:00] - Couldn't send HTTP request to server

[13:18:00] + Could not connect to Work Server (results)

[13:18:00] (171.64.65.55:80)

[13:18:00] - Error: Could not transmit unit 01 (completed February 6) to work server.

[13:18:00] + Attempting to send results [February 6 13:18:00 UTC]

[13:18:01] - Couldn't send HTTP request to server

[13:18:01] + Could not connect to Work Server (results)

[13:18:01] (171.67.108.26:8080)

[13:18:01] + Retrying using alternative port

[13:18:03] - Couldn't send HTTP request to server

[13:18:03] + Could not connect to Work Server (results)

[13:18:03] (171.67.108.26:80)

[13:18:03] Could not transmit unit 01 to Collection server; keeping in queue.

[13:18:33] Project: 11020 (Run 0, Clone 5674, Gen 19)
Click to expand...

over and over again
 
mrDMxtreme said:
thanks for the info

So do i just leave it to keep trying to reconnect?(i'm using gpu tracker v2 and it not moving to a new wu)

or is there a way to fold new WU and keep trying to send it every so often so i don't lose the wu?
Click to expand...

Most likely if it can't send the WU it won't get a WU either
sad.gif


so i guess their down again.......

Thank god this doesn't happen to often uHUM
crazy.gif


EDIT so all you can do, is wait for a new WU and wait untill it is send......

greetings Ray.......
 
My internet took a poop just after I went to work today, so my whole setup minus some of the slower CPUs was sitting idle for about 7 hours today. Grr.

Also, my 2500K crashed for the first time ever at 4.8GHz... time to bump up the voltage just a hair.

EDIT: And now I'm getting more huge WUs that are pulling a whole 9k PPD on my 2500K (back at 4.2GHz, it locked up again.)
 
Just lost a 6903 WU (~350,000 points)
dry.gif
I may have to back down the OC on my SR2 as this is the 3 WU in 20 that has failed. I've also noticed the temps on that board are showing 73-75C when they used to show 66-68C so I may have to clean the dust out of the Xigmateks.
 
riotcity76 said:
Just lost a 6903 WU (~350,000 points)
dry.gif
I may have to back down the OC on my SR2 as this is the 3 WU in 20 that has failed. I've also noticed the temps on that board are showing 73-75C when they used to show 66-68C so I may have to clean the dust out of the Xigmateks.
Click to expand...

That sucks big time. My system is looking pretty dusty on the inside as well so might be giving it a clean soon. Did clean it 3 months ago though, but my room is extremely dusty.
 
hmmblah said:
Finally have my i7 930 doing some decent PPD. It was averaging around 8000 PPD at 4GHz. I set both of my GPU console clients to use -advmethods. The top card was hitting 96C though, so I took off -advmethods on that card. With only one card doing -advmethods, my CPU PPD is now at around 15k, almost double!
Click to expand...

That's a nice boost for such a simple change.
laugh.gif


riotcity76 said:
Just lost a 6903 WU (~350,000 points)
dry.gif
I may have to back down the OC on my SR2 as this is the 3 WU in 20 that has failed. I've also noticed the temps on that board are showing 73-75C when they used to show 66-68C so I may have to clean the dust out of the Xigmateks.
Click to expand...

Bad times. What clocks are you running atm? And what Xeons are they again?
 
Xeon E5645s. I believe they are running at 20 * 178 for 3560mhz. Wasn't quite stable at 3.6ghz...I'm sure it can go higher, I just don't have the patience to tweak all the damn voltage settings (I also don't want to raise vcore and increase heat) so I'd rather just back it down to maybe 3.5.

Edit: Looking at my sig, it looks like my 6903 completed after all. I saw the 3 failed units in HFM and thought I had been at 2 and lost the unit.
 
You must log in or register to reply here.

Similar threads

P
Do some people never learn from the past?
Replies
2
Views
862
Pugsport
P
AlienALX
Wub Wub, time for something different.
4 5 6
Replies
111
Views
14K
AlienALX
AlienALX
P
just wanted to get this off my chest and see if i get any advice
Replies
4
Views
5K
KingNosser
K
mihapiha
F@H on a GTX1080 FE
Replies
11
Views
8K
hmmblah
hmmblah
madness777
A story worthy of a Thread?
Replies
3
Views
3K
Excalabur50
Excalabur50
Back
Top