Using multiple ports on the 680 Razer WB

[KirbyQK]

The block in question: Link

So basically I was wondering what you guys could tell me about setting up the block with multiple ins and outs. For example; IN the bottom left, OUT the top right. Through the top rad, CPU and then IN the top left and OUT the bottom right. Otherwise I have to run a tube all the way up the drive bays to the CPU from the pump down the bottom, this would help with the clutter.

Thanks for any help you can give guys!

 

[S_I_N]

you cant have the water running thru the block twice it just wont work the multi in and outs are for choice for one flow path not to allow multiple passes.