FoodStampz
New member
My 470 is only getting tiny 1k WU's now. I swear it used to get wu's that were worth more before.
Those little annoying F@H things ..
- Thread starter SnW
- Start date
dipzy
New member
yup they were worth more. I've never had a 1k WU but usually i get the one's that are worth about 3843 points
SmoulderingCircuits
New member
When I was folding on 5870s they got 1835pt units only, never anything other than that, just one after the other after the other.
Also I checked the point calculator and for a 32 core server you'll actually get nearer 250k PPD
Seems like I also got my GTX 680 to register as 2 GPU's.. and having 2 different workloads..
Anyone know if this is an intended bug?
I guess it has to do with the added GPUs.txt file, which just adds the GK104 without removing the GK114 from the table of GPU's I currently have installed.
Anyhow, running 2 GPUs from my 680 exactly doubles the PPD as the TPF is exactly the same whether it runs 1 or 2..
/D
Edit: After running it for some time, I noticed they dropped(both) and then, when I stopped the GK114, my graphics-driver stopped working. so..
Stopped the GK114 process, and removed it. let's see if this works better
Anyone know if this is an intended bug?
I guess it has to do with the added GPUs.txt file, which just adds the GK104 without removing the GK114 from the table of GPU's I currently have installed.
Anyhow, running 2 GPUs from my 680 exactly doubles the PPD as the TPF is exactly the same whether it runs 1 or 2..
/D
Edit: After running it for some time, I noticed they dropped(both) and then, when I stopped the GK114, my graphics-driver stopped working. so..
Stopped the GK114 process, and removed it. let's see if this works better
SmoulderingCircuits
New member
Seems like I also got my GTX 680 to register as 2 GPU's.. and having 2 different workloads..
Anyone know if this is an intended bug?
I guess it has to do with the added GPUs.txt file, which just adds the GK104 without removing the GK114 from the table of GPU's I currently have installed.
Anyhow, running 2 GPUs from my 680 exactly doubles the PPD as the TPF is exactly the same whether it runs 1 or 2..
/D
Edit: After running it for some time, I noticed they dropped(both) and then, when I stopped the GK114, my graphics-driver stopped working. so..
Stopped the GK114 process, and removed it. let's see if this works better
What PPD is the 680 alone getting?
yassarikhan786
New member
That's not too good then :/. It is very early so it should improve with updates as my 580 pulls in a 25k average, although it uses a lot more power to do so.
dipzy
New member
Been getting this weird error lately for GPU0, when i complete a WU, it says "starting new WU on GPU0" and then "Error reading Current client.cfg username. Client:GPU0"
In order to get it folding again, i have to stop it and then start it again. I do check back now and again to see progress and to check if everything is fine but at times, i can be away from PC for a good few hours and It's annoying since it can be a long time since the error occurred and those hours have then gone to waste with no folding getting done on GPU0.
In order to get it folding again, i have to stop it and then start it again. I do check back now and again to see progress and to check if everything is fine but at times, i can be away from PC for a good few hours and It's annoying since it can be a long time since the error occurred and those hours have then gone to waste with no folding getting done on GPU0.
SmoulderingCircuits
New member
I have delete and recreate my GPU slots everytime a WU completes for my 430s - think it might be something to do with running 2 WUs on each 430 to make sure it's utilising 100% of it and not ~90% of it - seen as there is no GPU QRB to worry about yet. SMP slot starts new units fine. Have also had an annoying anomalie where it takes 4-8 hours before it begins work on the next unit, no matter how much I try to persaude it.
kup
New member
After several attempts at getting my PPD back up, I have failed. One rig is just running too hot to Fold, one is crashing as and when it chooses and the third rig is about to be thrown out of the windows just because I've had enough of the first two.
Sorry for the down time, folks. I just don't have enough free time to dedicate to continuously rebuilding these rigs right now. I'll get as much Folding as I can as soon as I can.
Sorry for the down time, folks. I just don't have enough free time to dedicate to continuously rebuilding these rigs right now. I'll get as much Folding as I can as soon as I can.
FoodStampz
New member
You can always send it to me
yassarikhan786
New member
Yep, I had a string of 24+ hour WU's that failed to credit. Hopefully they turn out OK for you.
dipzy
New member
Thanks, wish i could leave me rig on 24/7... time to talk to my parents but i already know what the answer is going to be
The_Lanbone
New member
We have some 6+ year old server (2 actually if my memory serves me) just sitting in our server room not even powered up!! I keep joking with my buddy that I'm going to boot those suckers up and put F@H on them...I'm thinking today might be the day that needs to happen!
yassarikhan786
New member
We have some 6+ year old server (2 actually if my memory serves me) just sitting in our server room not even powered up!! I keep joking with my buddy that I'm going to boot those suckers up and put F@H on them...I'm thinking today might be the day that needs to happen!
Nice. How many threads in those bad boys?
