T600 - Dual 200mm front? How?

[Netroxen]

Hi guys,
I just recently saw a thread where a guy removed the top mounted HDD cage in the T600 case. I was wondering how to remove it, because at present it seems it has been hole punched to the chassis?
Also, how could I mount the top 200mm fan, will I need to drill some mounting holes?

Sorry for the n00b question, ta!

 

[Gamepro105]

HELLO!
I hope you mean the corsair 600t! If so this is a question i can answer!
Hooray!
I don't know if you are referring to my build on this forum or maybe you have just seen on about like i did.
http://forum.overclock3d.net/showthread.php?t=50689&page=3

The "hole punch" is a pop rivet you need to drill each of the heads off of them and then they will fall out do that to all of them around the CD drive cage and then it will just drop out you then need to drill mounting holes about one fifth of a millimeter away from the drive bay gap so it takes patience and skill and you cant mess it up or you will have a hole in your case that you cant use.
Its mainly a case of commonsense and engineer know how and experience its not to hard as i did it with my components still installed (Shh don't tell any one) but you don't want to make a mess of a £100 case.

Allot of people have done it here
http://www.overclock.net/t/831636/official-corsair-graphite-club/10140
I looked through each one until i got a better idea of how to do it, it takes some time.

If you need any help, closer pictures of what i've done or clearer instructions please ask

There are other ways of doing it for example on that official club forum there's a guy who gives the blueprints to make a metal plate up to do it and that was another option but i didn't want to spend to much time doing it.

EDIT: Also Remember to cut the plastic bits on the back of each drive mesh! I might just do a tutorial :L

EDIT: Found some more pictures
http://cdn.overclock.net/9/91/900x900px-LL-91a38165_2012-09-0718.08.35.jpeg
http://cdn.overclock.net/f/f4/900x900px-LL-f40e520c_2012-09-1802.01.22.jpeg
Thread section http://www.overclock.net/t/831636/official-corsair-graphite-club/7300#post_18123655

 

[Netroxen]

I was indeed referring to you, and yes - 600T, mybad!

Thankyou for the response mate!

 

[Gamepro105]

I was indeed referring to you, and yes - 600T, mybad!

Thankyou for the response mate!

Wooo i am famous! no problem!