storm trooper water cooling

[zan76]

Hi guys complete noob when it comes to water cooling and what parts to start off with but this is what i came up with just to get me started so tell me what you think ? the budget was only £220.

http://specialtech.co.uk/spshop/customer/product.php?productid=12933

and

http://specialtech.co.uk/spshop/customer/product.php?productid=13087

 

[Azurite]

Just a few suggestions:

XSPC RayStorm CPU Waterblock for Intel 44.99£

XSPC X2O 750 L/ph 12V Pump Rev2 with Dual Drive Bay Multi Fascia Acrylic Reservoir. 50.49£

Alphacool NexXxoS UT60 Full Copper 240mm (52.99£)

=148,47£. Then you have 71,53£ for tubing, fluids and fittings. You might need to check how thick rad you can fit into your case and that you have a dual 5,25" free for the res.

 

[S_I_N]

that RX240 kit should do ya fine bro all ya have to add to it is fluid The raystorm is a nice block but you'll only see a couple c diff in temps with that budget I'd go kit

 

[ThatBattlefieldGuy]

I don't think you will be able to mount a rx 240 in the case. I've been over this before in the review thread but the rad is about 55mm, fans are 25mm. You will need around 8 cm of clearance in the case, which this case doesn't have. You cannot mount fans up the top( ttl was wrong). You might be able to get away with a slim read though.

 

[tinytomlogan]

Rad fits inside and you would have to tweak the handle to fit the fans outside but it does work, Ive had it running here.

5mins with a dremmel and its sorted and it just makes the handle for show.... No biggy.

 

[ThatBattlefieldGuy]

Im talking natively ofcourse.