Man cave

TOMS Water cooled FT02 video has inspired me to install a 180mm rad in the bottom of my FT02 to watercool my CPU, pictures to follow soon.
 
OK the build thus far..

PC1010.jpg


I was determined to get the 180mm rad in there but at the same time utilize 2 Silverstone 180mmAir Penetrator fans in a push pull config, however they fouled the mobo by about 3mm so i took the top 180mm fan and literaly shaved 3.5mm off the bottom of it, this means it just fits in but at the same time the fan does not foul the rad in any way, of course i also had to cut out some of the mobo tray just like Tom did in his video.

PC1009.jpg


Ive got all the wiring and tubing to do next, oh and also notice how ive fitted the Pump res combo by using a 150mm L shaped bracket bolted to the rear of the case under the PSU, this was because i didnt want to be running tubes all the way to the front of my case and it being an FT02 theres no floor space available so i had to get inventive, i do hope it turns out alright looks wise but hey ho time will tell.
 
The latest of my FX8350 build photos, CPU is installed, Watercooling is leak tested, Windows 7 is installed on SSD drive, doing all updates at the moment.

PC2013.jpg

PC2011.jpg

PC2006.jpg
 
Why wouldnt you spend money on a single epic desktop and then a nice laptop?

Having 3 rigs in such a small area just seems nuts, even I dont do that!

Fully agree with you I would have build a 10k rig including 6 27" Dell IPS screens. Would be cheaper in my oppionion but your setup just looks awesome :cool:
 
A bit more touching up and how it looks with the side panel fitted...

pc3014.jpg

pc3001.jpg

pc3009.jpg


Its hard to get a good shot of how it looks in real life with my shitty camera.
 
That is one great room :D and if you want to fix or mod one there is always another computer ready haha
Good job mate !
 
Back
Top