Bombproof Builders Desk.....Build
- Thread starter dieseldog49
- Start date
dieseldog49
New member
Which part are you having trouble understanding? I would be happy to explain it more in detail
Last edited:
yassarikhan786
New member
Awesome work mate, is Gerry an emu?
dieseldog49
New member
Yes, one that Brandon hatched himself. He uses his movements for 3D modeling and such, plus he is a fun companion and chief chicken chaser 
dieseldog49
New member
My new power supply showed up today Seasonic 1000w Platinum
This will be the PSU for the Trapdoor PC with the 750w Seasonic for the wall PC I will be Sleeving both of these PSU's and it will be my first time doing so. Thanks again fro reading!
Seasonic 1000w Platinum
This will be the PSU for the Trapdoor PC with the 750w Seasonic for the wall PC I will be Sleeving both of these PSU's and it will be my first time doing so. Thanks again fro reading!
andrevautour
New member
great pictures of the plasma cutter! i'm really starting to love the look of those seasonic psu's. it's a shame they don't have black cables though.
dieseldog49
New member
Thanks guys, I have to wait until monday to get some grade 8 screws for mounting all of the stuff in the wall.
dieseldog49
New member
hey guys, sorry for the break in updates. However my finger is pretty much healed up and over the last 2 days pretty much all of the parts for the wall build have showed up in the mail. I am only waiting on the screws to mount the radiator.
I am having a hard time deciding which res to use for this build thoughts?
Also over the new year I managed to score a 1080P Viewsonic Projector for really cheap and with 0% financing for 18 months
I also upgraded to a Motorized 100 inch screen which means I can run everything from my desk, double
As soon as the screws come in I will start fitting everything and moving forward however I am in need of some 45 and 90 degree adapters for my compression fittings and I am pretty much out of budget until next month so I will have to source some through trade or whatever. Anywho thanks for reading as always, my next update will be a video of me explaining the full wall PC setup.
I am having a hard time deciding which res to use for this build thoughts?
Also over the new year I managed to score a 1080P Viewsonic Projector for really cheap and with 0% financing for 18 months
I also upgraded to a Motorized 100 inch screen which means I can run everything from my desk, double
As soon as the screws come in I will start fitting everything and moving forward however I am in need of some 45 and 90 degree adapters for my compression fittings and I am pretty much out of budget until next month so I will have to source some through trade or whatever. Anywho thanks for reading as always, my next update will be a video of me explaining the full wall PC setup.
andrevautour
New member
hey, i dont know if you found this already or not but i found how how to permanently shut off the leds on the msi boards
http://forum.overclock3d.net/showpost.php?p=595012&postcount=361
http://forum.overclock3d.net/showpost.php?p=595012&postcount=361
dieseldog49
New member
You rock andre! thanks for the info!
andrevautour
New member
no problem! i figured there should be a way but i don't think i ever looked closely in the eco section before. I guess it makes sense to have it there because it's cpu power phase led's but i just didn't think to look there. I found this completely by accident today while i was looking for some other setting in the bios.
dieseldog49
New member
Thanks man, I try. Should be filming the next videos tonight hopefully so stay tuned!
FTR.4500MHz
New member
Marvelous! Keep feeding us with updates!
Cheers!
Cheers!
dieseldog49
New member
Ok guys, time for a fairly large update. I was going to make a video of me explaingin how the wall pc was going to work and the purpose of it but I came home from work today feeling angry for no good reason so I decided to take it out on some modding. So here are the fruits of my labor for the afternoon.
First off I cut the Screws i had ordered from frozen CPU to leagnth so I could mount the rad.
Next up I needed to remove a bit of pipe from the area I would be working in as it was no longer in use.
Then vacuum and mount the rad
Next up is the pump
Then the Res.
After that i needed to get the 2x6 I would be using to mount the hinges to level and secure.
After that it was time to make the plank I would be using to mount all of my hardware. There are 4 holes in the lian li trade that make good mounting points.
And just my luck the Seasonic PSU fits perfectly between the nuts
next up was mounting the hinges and testing out the concept.
Woo Hoo, all looks well. Time to start running some tubing. Unfortunately the danger den res. I am using will not allow me to us compression fittings, so I am going to have to use barbs on the res (eww
)
CPU heatsink installed
and the video card next.
And here is a mockup, the tubes are too long atm but I wanted them that way till I am finished so I have some play room. Now I just need to get a bracket for the PSU and a couple other things and this thing is ready to rock! As always thanks for reading.
First off I cut the Screws i had ordered from frozen CPU to leagnth so I could mount the rad.
Next up I needed to remove a bit of pipe from the area I would be working in as it was no longer in use.
Then vacuum and mount the rad
Next up is the pump
Then the Res.
After that i needed to get the 2x6 I would be using to mount the hinges to level and secure.
After that it was time to make the plank I would be using to mount all of my hardware. There are 4 holes in the lian li trade that make good mounting points.
And just my luck the Seasonic PSU fits perfectly between the nuts
next up was mounting the hinges and testing out the concept.
Woo Hoo, all looks well. Time to start running some tubing. Unfortunately the danger den res. I am using will not allow me to us compression fittings, so I am going to have to use barbs on the res (eww
)
CPU heatsink installed
and the video card next.
And here is a mockup, the tubes are too long atm but I wanted them that way till I am finished so I have some play room. Now I just need to get a bracket for the PSU and a couple other things and this thing is ready to rock! As always thanks for reading.
andrevautour
New member
Looking good
FTR.4500MHz
New member
Great man!
Once done i'm gonna show up at your place!
Note: I allready reserved a slot on that huge desk for me and my rig!
Once done i'm gonna show up at your place!
Note: I allready reserved a slot on that huge desk for me and my rig!
dieseldog49
New member
Thanks! Any of the OC3D Crew have a open invitation to LAN at my place lol.
