800d case build log recon 50 cal

[GROUCHY]

BIGGG UPDATE xD

finaly got on with the aly work and jeez harder then i thought getin rid of the bits i dont need by hand tools are useless wha i got but hey perfect FIT ! just need drillin the holes in the perfect spot rivet it up but befor that need to do the 140mm hole and 3 20mm holes for the tubes xD and the mobo tray need 1 more bend for the front so its rivetd at the front back top and bottum on the middle shelf i need to get on with too so its all supported by all sides :lol:

 

[TAWN]

Funny read!!!
GL with the build, not a fan of bland cases...

 

[GROUCHY]

Funny read!!!
GL with the build, not a fan of bland cases...

it aint finished yet still need to do holes and sound proofing and carbon black and blue vinyling and needed a new mobo tray as i took out the hdd cage and it left a gap so you see the side panel it all make sense when done tawn :lol:

 

[GROUCHY]

was not expecting these parts from watercooluk butttt ....

Right this means i realy do need to get this case done lol and it was just a quick geuse if them sensors fit in the phobya 2 x hole front cover thing lol and they do sweeeet xD but the 2 x pumps and ress is all ready to go just need to sort out wich one of them l.e.ds are narrow or wide don't tell me which one the black sleevd is nor the blue sleevd one so if any 1 knows please let me know but thought i share this lot with you guys


thought i edit this forgot to mention i am getting more tubes and kink coil uv blue and more barbs this is jsut for now !

 

[dragoonk]

Look at all them parts, you seem to have big plans for this build. Curious to see how this turns out. Good Luck buddy!

 

[The Orange One]

Lucky Man! Can't wait to see what you do with those parts!

 

[GROUCHY]

thank you for the support guys and dragoonk and the orange one well i need to get more barbs and the monsoon lighting barb and blank screws not long came out perfect for my build shame the blank screw blue ones don't really match the barbs in the blue but its okay the monsoon barb lighting they need more work on the wide and str8 lighting is 2 diff blues its really strange since i need wide spread not str8 down lighting for the res so 2 lighting monsoon for the res with 2 x 2 leds either side total of 4 leds all lighting on the res be controlled with a sunbeam controller so it bounces to the tunes as well as the other lighting that's im gonna be doing in the case at the moment since i have never done metal work let alone done any metal work on a case i am kinda struggling as you see in the pictures the motherboard tray i done 1 bend original there is 3 bends i dunno how to do that so went with 1 bend i think it will work i hope um so yeah its kinda messing my head up so any 1 out there can do metal work HELP ME hahaaha i am trying to do it all by my self and in the next few days i have my hardware wich i will show you guys the over kill beasty hardware im slamming into this build

 

[GROUCHY]

Aint perfect buttttt im still new to this vinyl stuff and i think i aint done a bad job xD both reading the same now as i left them on so room temp of 20.2 - 20.3 c but there for the in and out in the loop straight thru so wont be any blockage at all

 

[GROUCHY]

Beep beep beep beep beep this is fun lol

http://www.youtube.com/watch?v=hBaKnMGuSn0&feature=youtu.be
weird shows blue on cam but its more of a strange white colour hmmm but fun fun fun fun lolol :lol: :lol: :lol:

 

[GROUCHY]

Yayy more parts vinyld xD

hehehe right then the fill port is done ready to be put on the case once i done the hole for it to the top 360 mm rad and the res yes them vinyl is hanging because just ordered some smoke tinted vinyl for the acrylic so when that comes i can then put it on the acrylic then bolt the face plate on then either make the blank screw things vinyl blue or just get blue ones i have not decided yet but that's all i have done for today apart from hammering the motherboard tray to make it flush gonna work on the front bend tomorrow still waiting on my sound proofing and still need more vinyl and barbs but it is getting there but slowly thanks for viewing guys :lol:

btw found my old 2 uv l.e.d and since the kink coil is uv i thought i share a pic l.e.d aint good but there it is and the plug at the back of the hose gonna do that blue vinyl xD so it kinda matches it all xD :lol:

 

[The Orange One]

That Carbon Vinyl looks epic!

 

[GROUCHY]

That Carbon Vinyl looks epic!

wich bit looks epic bud and that a good way or a bad way lol xD :lol:

 

[GROUCHY]

yeah still new to this vinyl stuff but i sound proof the top then vinyld over it maybe i should of cut the sound proof 3 x 120mm holes befor i put vinyl on woouldnt of got so many kinks in the top right but its okay you wont see that and you hardly see the top with the 360 rad and fans and 2 x 12'' black lighting xD but thought i share this with you guys :lol:

 

[GROUCHY]

Yayyyyy!!!!

woooooo order finaly COME BIG HEAVY BOX OOO YES YUMMMY YUMMMY PARTS xD FINALY HAS COME BEEN WAITING FOR ATLEAST A MONTH SOOOO HAPPPPY xD :lol: :lol:

 

[yassarikhan786]

That dusty keyboard is slightly off-putting

I also hope that is not the final application of vinyl, there are just so many bubbles in there.

 

[GROUCHY]

That dusty keyboard is slightly off-putting

I also hope that is not the final application of vinyl, there are just so many bubbles in there.

no that keyboard is oldddddddd it was just to use as my razzer lycosa was put away for my new keyboard and yeah bubbles in that vinyl trying to work with the 3 x 120mm dip aswell as the sound proofing but you wont see them bubbles when its done anyways and im gonna post the pictures of what was in the box xD :lol:

 

[GROUCHY]

Here is the hardware porn xD

So what you guys think ? good decision ? xD

 

[dragoonk]

Look at all them parts brother, you have been keeping busy, haven't you? Well good decisions, I don't know for the rest of the guys but I wouldn't mind any second hand older parts, let alone all THAT!

 

[GROUCHY]

Look at all them parts brother, you have been keeping busy, haven't you? Well good decisions, I don't know for the rest of the guys but I wouldn't mind any second hand older parts, let alone all THAT!

my 2nd hand parts from my 965 build im gonna use either as a media or just i dunno at the moment if i use it for media i have to un oc it the 965 is at 4.0 ghz lol but yeah thanks brother i cant wait to use the new parts and start oc'ing im using the mouse and keybaord and there sweeeetttt and the heasdset but i got the motherboard water block r7970 be water blocks and a cpu water block im so happy i finally got a decent beasty rig xD

 

[dragoonk]

I can't be anything but happy for you, and make sure you keep those pics coming with the build progress. We love that type of stuff