TTL’s Fan set up?

[Snakebite]

TTL sets his fans up on full 12v so my question is this. Taking 1 peripheral cable from an AX 850 PSU that has 4 Molex 4 pin plugs on it, how many 140mm LED fans can you run from each plug and how many can you run from the whole cable without power drop to the fans or over loading a plug or the whole cable.

I have 7x140mm LED fans to power up so I would like to piggy back as many fans together as possible to one Molex connecter/peripheral cable to keep wiring as tidy as possible.

Thanks.

 

[tinytomlogan]

I set them up to 12v for TESTING dude, for day to day use I either use a fan controller or fan speed reducer cables (nh-d14)

For so many fans piggy backing is fine just test them before hand to make sure the speeds are ok.

You may find a fan controller better for you but be prepaired to spend some time braiding should you want it 'TTL Tidy'

 

[Snakebite]

Thanks TTL. Will get a fan controller later just want to get my first build up and running and tested for now thus question on what I want to do with fans is ok. Have not got your experience/confidence to try braiding yet or to get a rig as tidy as you, just trying to do the best I can.

Cheers