yassarikhan786
New member
It's all good now. A clean re-installation of the Nvidia drivers did the trick 

I spoke too soon. Got the message again :/
It only seems to happen when trying to download a core 18 WU.
EDIT: The problem seems to stem from setting a client-type flag. I've just re-added the GPU slot without any flags and it's now running fine.
Stanford is trying to push core 18, IMO in needs alot more work, works terribly with AMD and servers are set to not assign to AMD, works just as poorly with 2nd gen Maxwell.....
Across the board PPD is an issue also, and has been reported when core 18 was in beta.
I kept getting core 15's and I stopped, it was getting too hot in here with 5 gpus folding. In the 30's F outside and still 82 in here. I have no windows at the shop just the front door![]()
Have this errorcode "19" quite often,will install new beta driver later today.
Does the GPU client show an "Update_Core" message?
I was having a problem when I had the beta flag set. I removed it and all was well. My PPD wasn't affected from what I could tell.
No update core message,but hard reboot without warning and errorcode 19 after that.
New beta driver installed,temps has dropped but also ppd has by some 75k ppd at wu10467.
Think ill find an older driver later,maybe cat-14.2.
That's unfortunate. I hope the older driver works out for you.
Changed from tridentx 2666mhz-c10 to hyperx 2666mhz-c11,think my tridentx dimms has done too manny hard benchmarks to be long term stable.:huh:
Getting pretty sick of receiving just base points for some of these Core 18 wu's![]()
Whilst good for benchmarking the gtx980 is awful on beta Wu,only 90k ppd where r9 290x shines through.
Try using advanced rather than beta as you are probably getting beta Core 18 WU's. There is a driver issue with Maxwell and Open CL.
On 9201 WU's my 970 does around 265K, your 980 should hit 350K or better with a little OC.
Your AMD card will not be assigned Core 18 WU's