thestepster
New member
im running gpu tracker without the flag and im gettin strait 6800 wu's
Those little annoying F@H things ..
- Thread starter SnW
- Start date
im running gpu tracker without the flag and im gettin strait 6800 wu's
Yea the 6800 is all i get as well but NO 6811 WU's , they have some bad ones between them
AMD_PBz
New member
Anyone else run into this tonight? it wouldn't be such a big deal except its a 2684
[23:03:01] - Autosending finished units... [November 23 23:03:01 UTC]
[23:03:01] Trying to send all finished work units
[23:03:01] + No unsent completed units remaining.
[23:03:01] - Autosend completed
[23:06:56] Completed 245000 out of 250000 steps (98%)
[23:54:12] Completed 247500 out of 250000 steps (99%)
[00:41:29] Completed 250000 out of 250000 steps (100%)
[00:41:42] DynamicWrapper: Finished Work Unit: sleep=10000
[00:41:52]
[00:41:52] Finished Work Unit:
[00:41:52] - Reading up to 52629024 from "work/wudata_07.trr": Read 52629024
[00:41:52] trr file hash check passed.
[00:41:52] - Reading up to 47020284 from "work/wudata_07.xtc": Read 47020284
[00:41:53] xtc file hash check passed.
[00:41:53] edr file hash check passed.
[00:41:53] logfile size: 213869
[00:41:53] Leaving Run
[00:41:53] - Writing 100031121 bytes of core data to disk...
[00:41:55] ... Done.
[00:42:10] - Shutting down core
[00:42:10]
[00:42:10] Folding@home Core Shutdown: FINISHED_UNIT
[00:42:15] CoreStatus = 64 (100)
[00:42:15] Unit 7 finished with 42 percent of time to deadline remaining.
[00:42:15] Updated performance fraction: 0.674441
[00:42:15] Sending work to server
[00:42:15] Project: 2684 (Run 6, Clone 8, Gen 30)
[00:42:15] + Attempting to send results [November 24 00:42:15 UTC]
[00:42:15] - Reading file work/wuresults_07.dat from core
[00:42:15] (Read 100031121 bytes from disk)
[00:42:15] Connecting to http://171.67.108.22:8080/
[00:42:15] - Couldn't send HTTP request to server
[00:42:15] (Got status 503)
[00:42:15] + Could not connect to Work Server (results)
[00:42:15] (171.67.108.22:8080)
[00:42:15] + Retrying using alternative port
[00:42:15] Connecting to http://171.67.108.22:80/
[00:42:15] - Couldn't send HTTP request to server
[00:42:15] (Got status 503)
[00:42:15] + Could not connect to Work Server (results)
[00:42:15] (171.67.108.22:80)
[00:42:15] - Error: Could not transmit unit 07 (completed November 24) to work server.
[00:42:15] - 1 failed uploads of this unit.
[00:42:15] Keeping unit 07 in queue.
[00:42:15] Trying to send all finished work units
[00:42:15] Project: 2684 (Run 6, Clone 8, Gen 30)
[00:42:15] + Attempting to send results [November 24 00:42:15 UTC]
[00:42:15] - Reading file work/wuresults_07.dat from core
[00:42:15] (Read 100031121 bytes from disk)
[00:42:15] Connecting to http://171.67.108.22:8080/
[00:42:16] - Couldn't send HTTP request to server
[00:42:16] (Got status 503)
[00:42:16] + Could not connect to Work Server (results)
[00:42:16] (171.67.108.22:8080)
[00:42:16] + Retrying using alternative port
[00:42:16] Connecting to http://171.67.108.22:80/
[00:42:16] - Couldn't send HTTP request to server
[00:42:16] (Got status 503)
[00:42:16] + Could not connect to Work Server (results)
[00:42:16] (171.67.108.22:80)
[00:42:16] - Error: Could not transmit unit 07 (completed November 24) to work server.
[00:42:16] - 2 failed uploads of this unit.
[00:42:16] + Attempting to send results [November 24 00:42:16 UTC]
[00:42:16] - Reading file work/wuresults_07.dat from core
[00:42:16] (Read 100031121 bytes from disk)
[00:42:16] Connecting to http://171.67.108.25:8080/
[00:42:16] Posted data.
[00:42:16] Initial: 5448; + Could not connect to Work Server (results)
[00:42:16] (171.67.108.25:8080)
[00:42:16] + Retrying using alternative port
[00:42:16] Connecting to http://171.67.108.25:80/
[00:42:16] Posted data.
[00:42:16] Initial: 5448; + Could not connect to Work Server (results)
[00:42:16] (171.67.108.25:80)
[00:42:16] Could not transmit unit 07 to Collection server; keeping in queue.
[00:42:16] + Sent 0 of 1 completed units to the server
[00:42:16] - Preparing to get new work unit...
[00:42:16] Cleaning up work directory
[00:42:16] + Attempting to get work packet
[00:42:16] Passkey found
[00:42:16] - Will indicate memory of 5000 MB
[00:42:16] - Detect CPU. Vendor: GenuineIntel, Family: 6, Model: 10, Stepping: 5
[00:42:16] - Connecting to assignment server
[00:42:16] Connecting to http://assign.stanford.edu:8080/
[00:42:17] Posted data.
[00:42:17] Initial: ED82; - Successful: assigned to (130.237.232.141).
[00:42:17] + News From Folding@Home: Welcome to Folding@Home
[00:42:17] Loaded queue successfully.
[00:42:17] Sent data
[00:42:17] Connecting to http://130.237.232.141:8080/
[00:42:25] Posted data.
[00:42:25] Initial: 0000; - Receiving payload (expected size: 24873962)
[00:45:11] - Downloaded at ~146 kB/s
[00:45:11] - Averaged speed for that direction ~504 kB/s
[00:45:11] + Received work.
[00:45:11] Trying to send all finished work units
[00:45:11] Project: 2684 (Run 6, Clone 8, Gen 30)
[00:45:11] + Attempting to send results [November 24 00:45:11 UTC]
[00:45:11] - Reading file work/wuresults_07.dat from core
[00:45:11] (Read 100031121 bytes from disk)
[00:45:11] Connecting to http://171.67.108.22:8080/
[00:45:11] - Couldn't send HTTP request to server
[00:45:11] (Got status 503)
[00:45:11] + Could not connect to Work Server (results)
[00:45:11] (171.67.108.22:8080)
[00:45:11] + Retrying using alternative port
[00:45:11] Connecting to http://171.67.108.22:80/
[00:45:11] - Couldn't send HTTP request to server
[00:45:11] (Got status 503)
[00:45:11] + Could not connect to Work Server (results)
[00:45:11] (171.67.108.22:80)
[00:45:12] - Error: Could not transmit unit 07 (completed November 24) to work server.
[00:45:12] - 3 failed uploads of this unit.
[00:45:12] + Attempting to send results [November 24 00:45:12 UTC]
[00:45:12] - Reading file work/wuresults_07.dat from core
[00:45:12] (Read 100031121 bytes from disk)
[00:45:12] Connecting to http://171.67.108.25:8080/
[00:45:12] - Couldn't send HTTP request to server
[00:45:12] (Got status 503)
[00:45:12] + Could not connect to Work Server (results)
[00:45:12] (171.67.108.25:8080)
[00:45:12] + Retrying using alternative port
[00:45:12] Connecting to http://171.67.108.25:80/
[00:45:12] - Couldn't send HTTP request to server
[00:45:12] (Got status 503)
[00:45:12] + Could not connect to Work Server (results)
[00:45:12] (171.67.108.25:80)
[00:45:12] Could not transmit unit 07 to Collection server; keeping in queue.
[00:45:12] + Sent 0 of 1 completed units to the server
[00:45:12] + Closed connections
[00:45:12]
[00:45:12] + Processing work unit
[00:45:12] Core required: FahCore_a3.exe
[00:45:12] Core found.
[00:45:12] Working on queue slot 08 [November 24 00:45:12 UTC]
[00:45:12] + Working ...
[00:45:12] - Calling '.\FahCore_a3.exe -dir work/ -nice 19 -suffix 08 -np 7 -priority 90 -nocpulock -checkpoint 15 -verbose -lifeline 988 -version 630'
[00:45:12]
[00:45:12] *------------------------------*
[00:45:12] Folding@Home Gromacs SMP Core
[00:45:12] Version 2.22 (Mar 12, 2010)
[00:45:12]
[00:45:12] Preparing to commence simulation
[00:45:12] - Looking at optimizations...
[00:45:12] - Created dyn
[00:45:12] - Files status OK
[00:45:17] - Expanded 24873450 -> 30796293 (decompressed 123.8 percent)
[00:45:17] Called DecompressByteArray: compressed_data_size=24873450 data_size=30796293, decompressed_data_size=30796293 diff=0
[00:45:17] - Digital signature verified
[00:45:17]
[00:45:17] Project: 6900 (Run 24, Clone 11, Gen 1)
[23:03:01] - Autosending finished units... [November 23 23:03:01 UTC]
[23:03:01] Trying to send all finished work units
[23:03:01] + No unsent completed units remaining.
[23:03:01] - Autosend completed
[23:06:56] Completed 245000 out of 250000 steps (98%)
[23:54:12] Completed 247500 out of 250000 steps (99%)
[00:41:29] Completed 250000 out of 250000 steps (100%)
[00:41:42] DynamicWrapper: Finished Work Unit: sleep=10000
[00:41:52]
[00:41:52] Finished Work Unit:
[00:41:52] - Reading up to 52629024 from "work/wudata_07.trr": Read 52629024
[00:41:52] trr file hash check passed.
[00:41:52] - Reading up to 47020284 from "work/wudata_07.xtc": Read 47020284
[00:41:53] xtc file hash check passed.
[00:41:53] edr file hash check passed.
[00:41:53] logfile size: 213869
[00:41:53] Leaving Run
[00:41:53] - Writing 100031121 bytes of core data to disk...
[00:41:55] ... Done.
[00:42:10] - Shutting down core
[00:42:10]
[00:42:10] Folding@home Core Shutdown: FINISHED_UNIT
[00:42:15] CoreStatus = 64 (100)
[00:42:15] Unit 7 finished with 42 percent of time to deadline remaining.
[00:42:15] Updated performance fraction: 0.674441
[00:42:15] Sending work to server
[00:42:15] Project: 2684 (Run 6, Clone 8, Gen 30)
[00:42:15] + Attempting to send results [November 24 00:42:15 UTC]
[00:42:15] - Reading file work/wuresults_07.dat from core
[00:42:15] (Read 100031121 bytes from disk)
[00:42:15] Connecting to http://171.67.108.22:8080/
[00:42:15] - Couldn't send HTTP request to server
[00:42:15] (Got status 503)
[00:42:15] + Could not connect to Work Server (results)
[00:42:15] (171.67.108.22:8080)
[00:42:15] + Retrying using alternative port
[00:42:15] Connecting to http://171.67.108.22:80/
[00:42:15] - Couldn't send HTTP request to server
[00:42:15] (Got status 503)
[00:42:15] + Could not connect to Work Server (results)
[00:42:15] (171.67.108.22:80)
[00:42:15] - Error: Could not transmit unit 07 (completed November 24) to work server.
[00:42:15] - 1 failed uploads of this unit.
[00:42:15] Keeping unit 07 in queue.
[00:42:15] Trying to send all finished work units
[00:42:15] Project: 2684 (Run 6, Clone 8, Gen 30)
[00:42:15] + Attempting to send results [November 24 00:42:15 UTC]
[00:42:15] - Reading file work/wuresults_07.dat from core
[00:42:15] (Read 100031121 bytes from disk)
[00:42:15] Connecting to http://171.67.108.22:8080/
[00:42:16] - Couldn't send HTTP request to server
[00:42:16] (Got status 503)
[00:42:16] + Could not connect to Work Server (results)
[00:42:16] (171.67.108.22:8080)
[00:42:16] + Retrying using alternative port
[00:42:16] Connecting to http://171.67.108.22:80/
[00:42:16] - Couldn't send HTTP request to server
[00:42:16] (Got status 503)
[00:42:16] + Could not connect to Work Server (results)
[00:42:16] (171.67.108.22:80)
[00:42:16] - Error: Could not transmit unit 07 (completed November 24) to work server.
[00:42:16] - 2 failed uploads of this unit.
[00:42:16] + Attempting to send results [November 24 00:42:16 UTC]
[00:42:16] - Reading file work/wuresults_07.dat from core
[00:42:16] (Read 100031121 bytes from disk)
[00:42:16] Connecting to http://171.67.108.25:8080/
[00:42:16] Posted data.
[00:42:16] Initial: 5448; + Could not connect to Work Server (results)
[00:42:16] (171.67.108.25:8080)
[00:42:16] + Retrying using alternative port
[00:42:16] Connecting to http://171.67.108.25:80/
[00:42:16] Posted data.
[00:42:16] Initial: 5448; + Could not connect to Work Server (results)
[00:42:16] (171.67.108.25:80)
[00:42:16] Could not transmit unit 07 to Collection server; keeping in queue.
[00:42:16] + Sent 0 of 1 completed units to the server
[00:42:16] - Preparing to get new work unit...
[00:42:16] Cleaning up work directory
[00:42:16] + Attempting to get work packet
[00:42:16] Passkey found
[00:42:16] - Will indicate memory of 5000 MB
[00:42:16] - Detect CPU. Vendor: GenuineIntel, Family: 6, Model: 10, Stepping: 5
[00:42:16] - Connecting to assignment server
[00:42:16] Connecting to http://assign.stanford.edu:8080/
[00:42:17] Posted data.
[00:42:17] Initial: ED82; - Successful: assigned to (130.237.232.141).
[00:42:17] + News From Folding@Home: Welcome to Folding@Home
[00:42:17] Loaded queue successfully.
[00:42:17] Sent data
[00:42:17] Connecting to http://130.237.232.141:8080/
[00:42:25] Posted data.
[00:42:25] Initial: 0000; - Receiving payload (expected size: 24873962)
[00:45:11] - Downloaded at ~146 kB/s
[00:45:11] - Averaged speed for that direction ~504 kB/s
[00:45:11] + Received work.
[00:45:11] Trying to send all finished work units
[00:45:11] Project: 2684 (Run 6, Clone 8, Gen 30)
[00:45:11] + Attempting to send results [November 24 00:45:11 UTC]
[00:45:11] - Reading file work/wuresults_07.dat from core
[00:45:11] (Read 100031121 bytes from disk)
[00:45:11] Connecting to http://171.67.108.22:8080/
[00:45:11] - Couldn't send HTTP request to server
[00:45:11] (Got status 503)
[00:45:11] + Could not connect to Work Server (results)
[00:45:11] (171.67.108.22:8080)
[00:45:11] + Retrying using alternative port
[00:45:11] Connecting to http://171.67.108.22:80/
[00:45:11] - Couldn't send HTTP request to server
[00:45:11] (Got status 503)
[00:45:11] + Could not connect to Work Server (results)
[00:45:11] (171.67.108.22:80)
[00:45:12] - Error: Could not transmit unit 07 (completed November 24) to work server.
[00:45:12] - 3 failed uploads of this unit.
[00:45:12] + Attempting to send results [November 24 00:45:12 UTC]
[00:45:12] - Reading file work/wuresults_07.dat from core
[00:45:12] (Read 100031121 bytes from disk)
[00:45:12] Connecting to http://171.67.108.25:8080/
[00:45:12] - Couldn't send HTTP request to server
[00:45:12] (Got status 503)
[00:45:12] + Could not connect to Work Server (results)
[00:45:12] (171.67.108.25:8080)
[00:45:12] + Retrying using alternative port
[00:45:12] Connecting to http://171.67.108.25:80/
[00:45:12] - Couldn't send HTTP request to server
[00:45:12] (Got status 503)
[00:45:12] + Could not connect to Work Server (results)
[00:45:12] (171.67.108.25:80)
[00:45:12] Could not transmit unit 07 to Collection server; keeping in queue.
[00:45:12] + Sent 0 of 1 completed units to the server
[00:45:12] + Closed connections
[00:45:12]
[00:45:12] + Processing work unit
[00:45:12] Core required: FahCore_a3.exe
[00:45:12] Core found.
[00:45:12] Working on queue slot 08 [November 24 00:45:12 UTC]
[00:45:12] + Working ...
[00:45:12] - Calling '.\FahCore_a3.exe -dir work/ -nice 19 -suffix 08 -np 7 -priority 90 -nocpulock -checkpoint 15 -verbose -lifeline 988 -version 630'
[00:45:12]
[00:45:12] *------------------------------*
[00:45:12] Folding@Home Gromacs SMP Core
[00:45:12] Version 2.22 (Mar 12, 2010)
[00:45:12]
[00:45:12] Preparing to commence simulation
[00:45:12] - Looking at optimizations...
[00:45:12] - Created dyn
[00:45:12] - Files status OK
[00:45:17] - Expanded 24873450 -> 30796293 (decompressed 123.8 percent)
[00:45:17] Called DecompressByteArray: compressed_data_size=24873450 data_size=30796293, decompressed_data_size=30796293 diff=0
[00:45:17] - Digital signature verified
[00:45:17]
[00:45:17] Project: 6900 (Run 24, Clone 11, Gen 1)
riotcity76
New member
Edit nm
killablade
New member
It still wont go past the 45% it got stuck at.
How do I dump this WU?
How do I dump this WU?
killablade
New member
Eeermm.... what the..?
First it's going slow as hell, then I restart the client and it gives me this lol
thestepster
New member
Eeermm.... what the..?
First it's going slow as hell, then I restart the client and it gives me this lol
possibly unstable overclocks mate
Eeermm.... what the..?
First it's going slow as hell, then I restart the client and it gives me this lol
Looks as if all those frames were completed at the same time???? Def. something wrong with that!
again with mine been running it all day and my ppd still hasn't updated :S
and on my cpu im getting:
[13:28:26] - Connecting to assignment server
[13:28:26] Connecting to http://assign.stanford.edu:8080/
[13:28:27] Posted data.
[13:28:27] Initial: 43AB; - Successful: assigned to (171.67.108.22).
[13:28:27] + News From Folding@Home: Welcome to Folding@Home
[13:28:27] Loaded queue successfully.
[13:28:27] Sent data
[13:28:27] Connecting to http://171.67.108.22:8080/
[13:28:37] Posted data.
[13:28:37] Initial: 0000; - Error: Work packet too large
[13:28:37] - Attempt #1 to get work failed, and no other work to do.
Waiting before retry.
[13:28:47] + Attempting to get work packet
[13:28:47] Passkey found
[13:28:47] - Will indicate memory of 6135 MB
[13:28:47] - Connecting to assignment server
[13:28:47] Connecting to http://assign.stanford.edu:8080/
[13:28:48] Posted data.
[13:28:48] Initial: 43AB; - Successful: assigned to (171.67.108.22).
[13:28:48] + News From Folding@Home: Welcome to Folding@Home
[13:28:48] Loaded queue successfully.
[13:28:48] Sent data
[13:28:48] Connecting to http://171.67.108.22:8080/
[13:28:58] Posted data.
[13:28:58] Initial: 0000; - Error: Work packet too large
[13:28:58] - Attempt #2 to get work failed, and no other work to do.
Waiting before retry.
[13:29:12] + Attempting to get work packet
[14:16:17] Passkey found
[14:16:17] - Will indicate memory of 6135 MB
[14:16:17] - Connecting to assignment server
[14:16:17] Connecting to http://assign.stanford.edu:8080/
[14:16:18] Posted data.
[14:16:18] Initial: 43AB; - Successful: assigned to (171.67.108.22).
[14:16:18] + News From Folding@Home: Welcome to Folding@Home
[14:16:18] Loaded queue successfully.
[14:16:18] Sent data
[14:16:18] Connecting to http://171.67.108.22:8080/
[14:16:28] Posted data.
[14:16:28] Initial: 0000; - Error: Work packet too large
[14:16:28] - Attempt #3 to get work failed, and no other work to do.
Waiting before retry.
and on my cpu im getting:
[13:28:26] - Connecting to assignment server
[13:28:26] Connecting to http://assign.stanford.edu:8080/
[13:28:27] Posted data.
[13:28:27] Initial: 43AB; - Successful: assigned to (171.67.108.22).
[13:28:27] + News From Folding@Home: Welcome to Folding@Home
[13:28:27] Loaded queue successfully.
[13:28:27] Sent data
[13:28:27] Connecting to http://171.67.108.22:8080/
[13:28:37] Posted data.
[13:28:37] Initial: 0000; - Error: Work packet too large
[13:28:37] - Attempt #1 to get work failed, and no other work to do.
Waiting before retry.
[13:28:47] + Attempting to get work packet
[13:28:47] Passkey found
[13:28:47] - Will indicate memory of 6135 MB
[13:28:47] - Connecting to assignment server
[13:28:47] Connecting to http://assign.stanford.edu:8080/
[13:28:48] Posted data.
[13:28:48] Initial: 43AB; - Successful: assigned to (171.67.108.22).
[13:28:48] + News From Folding@Home: Welcome to Folding@Home
[13:28:48] Loaded queue successfully.
[13:28:48] Sent data
[13:28:48] Connecting to http://171.67.108.22:8080/
[13:28:58] Posted data.
[13:28:58] Initial: 0000; - Error: Work packet too large
[13:28:58] - Attempt #2 to get work failed, and no other work to do.
Waiting before retry.
[13:29:12] + Attempting to get work packet
[14:16:17] Passkey found
[14:16:17] - Will indicate memory of 6135 MB
[14:16:17] - Connecting to assignment server
[14:16:17] Connecting to http://assign.stanford.edu:8080/
[14:16:18] Posted data.
[14:16:18] Initial: 43AB; - Successful: assigned to (171.67.108.22).
[14:16:18] + News From Folding@Home: Welcome to Folding@Home
[14:16:18] Loaded queue successfully.
[14:16:18] Sent data
[14:16:18] Connecting to http://171.67.108.22:8080/
[14:16:28] Posted data.
[14:16:28] Initial: 0000; - Error: Work packet too large
[14:16:28] - Attempt #3 to get work failed, and no other work to do.
Waiting before retry.
killablade
New member
Nah they werent mate that was just something weird that happened after I restarted the client, was fine before. It took extra long to complete 1%, usually does 1% in 1-2 minutes but took 15 minutes now.
Might be unstable OC, but I hadn't messed around with the clocks when I first started getting these problems, have folded fine with these clocks for multiple days, and now I get stuff like this. Also, stuff isn't fixed after lowering the clocks a bit and I also installed a fan on the side panel that lowered the temps by a couple of degrees. =/
thestepster
New member
just setup the client again mate quickest option i always find to solve issues
killablade
New member
Yeah the client is defo bullshitting me to the max mate, it's now telling me my machine is unstable while I'm only running the gpu client and I reset all the clocks and volts on that, so it isn't even overclocked! CPU and memory is at the same clocks and volts it's been at for months -.-
Eeermm.... what the..?
First it's going slow as hell, then I restart the client and it gives me this lol
When this happens this def doesn't mrean you will lose the WU , BUT that means unless you are on time fiddling with it
aka putting in stable clocks that will finish the WU ...
You (ones this ERROR comes up) close the console ASAP then reduce the GPU clock speeds and you are fine again...
killablade
New member
When this happens this def doesn't mrean you will lose the WU , BUT that means unless you are on time fiddling with it
aka putting in stable clocks that will finish the WU ...
You (ones this ERROR comes up) close the console ASAP then reduce the GPU clock speeds and you are fine again...
Did this to me again when not even running any overclock. I call BS on F@H! xD
If you guys are having problems with 6811's you need to post it at Stanford in the F@H forums. http://foldingforum.org/viewforum.php?f=59&sid=83cceccd1974828357992c5d68410f21
There seems to be a lot of discussion/problems with that series of WU's. Be prepared to deal with some blunt jerks but your input might be constructive. ATM they are -advmethods, if enough problems are exposed it may help them from going public with the 6811 which would be a huge mistake IMO.
If you feel like posting look over the section a little and get a feel for what is going on
