The Darkness from Raven

[Raven]

some pictures on my main computer.

the glowing thingy is a chromatic windmill fancontroller with 3 temp sensors but the d*** clock keeps changing time :banghead:

the 2 front leds have been removed, i sometimes sleep on the couch and they are quite bright.

the second and third image shows the 120mm sidefan i put in some time ago.

the white socket in the middle of the image goes to the sidefan and they disconnects fine when the side is removed.

in the lower right you se the 92mm fan used to create more airflow to the passive zalman heatsink on the chipset.

works quite well temp is up to 50c on the base of the heatsink.

in the second image you se my new shiny thermalright ultra90 heatsink works well and is much quieter than the zalman 7000b alcu i used to have in there.

have the panaflo fan on a zalman fanmate to reduce noise and cools the cpu to 45c today with a roomtemp of 27-28c and like it alot.

if you havent seen it yet but i HATE cables, they are all over the place and never where i want them to be

 

[JN]

Argh its a spiders web!!!

Seiously tidy those cables

 

[NickS]

Glad to finally see pix of the beast, Raven . You need to practice some cable management tho . Apart from the cables, it looks good

Nick

 

[Raven]

some of the cables will be rearranged when i get me a fan to replace the 92mm i have in there.

also bought me 100 cableties which will help alot.

dont know what the h*** antec has done with the wires but its the only psu that gives me trouble.

have an old jnc and a chieftec with more wires than the antec but none of them gives me any trouble.

for some reason some of the wires that comes out from the antec goes a couple of turns around each other before they continue but that psu wont be there for much longer.

will be replaced probably with a tagan sometimes before winter.

 

[FragTek]

Jesus wire management is needed! Other than that, sweet rig you're rockin' there!

 

[FarFarAway]

Nice apart from the wire managemennt

 

[Raven]

messed around alittle with the wiremanagement half an hour ago so looks alittle better now, with a paperbag over the head

my sister has come over from uk so will borrow here camera to take better pictures next week.

also thinking of cutting off one of the cables from the psu, the only time i used it for the last 3 years was when i measured up V on the 3 main rails.

 

[NickS]

AHH don't cut it off! Just shove it up above the PSU, you have room up there iirc.

 

[Raven]

doubt i have enough space for it, i had trouble just getting the tempsensor in that area and its less than 4mm thick.

more thinking of cutting the wires and use "shrinktube" to isolate the ends in a proper manner.

would remove some of the problems i have.

 

[Mullet]

Get yaself an AC-Ryan PSU modding kit....will sweeten that rig even more!