Res Design #2

B

Barry

New member
Been thunking about my new Res design for watery, so without delay...:

(the only thing thats accutate exactly is the outer size of the res and the thickness) Allthough you can't tell by the res, the holes at the top with the plugs, will actually be 11.8mm holes with a G1/4" tap at the top..

Last but not least, they aren't on the res, but there will be 8 holes in the outer side of the res, so that I can connect it directly to the case...

The res...:







Any ideas?
 
I don't know my watercooling, but is that going to be 1 res for 2 loops??

If so then it's the 1st I've seen one, can't wait to see it finished.
 


Final design.. Ying and Yang (ish) with smooth and jagged...

The Green loop is quite restrictive so that the DDC doesn't make too much noise..
 
That was one reason...

I know that with a low restriction, my 10W DDC is quite 'woosh-y' which I don't really like. I'd also sacrifice a few degrees for looks.
 
That is so well thought out but yeah the flow will be reduced quite a bit.. I know you said thats the plan with the green. Hope that all works out ok. Also really hope that it comes out as good as the plans look :)

Good luck.
 
You must log in or register to reply here.

Similar threads

AlienALX
The Fairchild Ghost subwoofer project
2
Replies
34
Views
574
AlienALX
AlienALX
P
Smooth old school Corsair 600T
Replies
16
Views
7K
WillSK
WillSK
AlienALX
Modular.
4 5 6
Replies
103
Views
15K
AlienALX
AlienALX
M
Snake Eyes 2021 - ASUS / Paramount pictures giveaway build.
Replies
2
Views
1K
Excalabur50
Excalabur50
AlienALX
Wub Wub, time for something different.
4 5 6
Replies
111
Views
14K
AlienALX
AlienALX
Back
Top