Project: Overdefined

[wotevajjjj]

What do you use for rendering? Is it compatible with google sketchup?

I use Solidworks. It can even do fluid and therodynamic simulation which is very important when designing a case (not) I don't know if you can convert the parts to sketch up but since sldw is so expensive and extensive, I don't think so.

 

[wotevajjjj]

Internal work almost completed, just doing some strenght tests atm, Panels will be done during next week.

Also I'm working on overclocking the components fx8120 currently @ 4.9gHz using the Be Quiet! Dark Rock Pro C1 getting about 55°c so plenty of room for improvement.

 

[killablade]

Get some pics up fella :')

 

[fredtrix]

Interesting, I will follow this

Take me somewhere awesome!

 

[ruthless_villain]

Internal work almost completed, just doing some strenght tests atm, Panels will be done during next week.

Also I'm working on overclocking the components fx8120 currently @ 4.9gHz using the Be Quiet! Dark Rock Pro C1 getting about 55°c so plenty of room for improvement.

bulldozer temps are not accurate mate, in my waterloop i was getting 8 degrees @ 5Ghz the ambient was around 25

 

[wotevajjjj]

I know, I also use the "put your hand behind the cooler" method The air feels really cool. what speeds have you got yours upto ?

 

[ruthless_villain]

5 Ghz was the max i got it too but it wasnt stable but will be trying again as soon as i get my case powdercoated and finally mod the roof for a 360mm rad

 

[wotevajjjj]

Oh hello dear delivery man

 

[wotevajjjj]

Work on this is going very slow atm, I got so much work to do around here

Anyway, I went back to the school where I'm having this made, and I was checking out their machines.

I have to start all over again on the outside :'(

Here's what I got for the front sofar, top part is a door, haven't done much work on it tbh:

btw, here's what helps me pay for the non sponsored parts:

You just buy some laptops with a broken screen/touchpad/keyboard etc. Than put them in a little box that looks half good and sell it on as a htpc.. pretty easy money

mesh goes in sides, top slides open. the front holes are usb and audio.

 

[wotevajjjj]

I'm having my doubts on the side pods, any tips ?

 

[wotevajjjj]

This all taking way to long

Terribly sorry about that, but there is not much I can do about it. The design is now finished and send off to different metal working shops, hoping for a better price. I'm having my doubts on the school because the years almost over which means it would be postponed severel months