Project: Nameless

[nepas]

have decided to build myself a nice case for my pc.The main difference between this and most of the other projects floating around is that I wont be buying a nice new flash tower to put it in,after having a look on ebay i have found myself a nice candidate for the job.....I already have my mobo(thanks to Webbo).

heres the specs so far:

Q6600

DFI X38 lanparty

XFX 8800gt(looking at new ati 4870 though:yumyum

2 x 1gb OCZ platinum 6400(looking at G Skill 2 x 2gb 8500)

so the plan so far is to have 2 loops.

1 for the pwm/n/b and s/b(depends on the availability on the pwm block)

2. for the cpu and gfx card.

 

[Acid90]

Old school!

I'll keep an eye out, good luck!

 

[nepas]

old skool ftw!!

cheers mate

 

[GavX]

would CPU and northbridge and GPU and theh rest on one loop not be better? I havev CPU and GPU on the same loop but will your primary loop not get a bit warm where as your second might get very hot? I might be (and most like am) wrong but just a though, if you are doing 2 loops make it to spead the heat? Lovely case there, fresh frrom '95...

 

[nepas]

trust me the case is not going to stay looking that way for too long

 

[PV5150]

Nice one mate, there'll be plenty of room in that server case. I'll keep an eye on this thread to see how it progresses.

 

[nepas]

update:O Dear!!!

ok,its time to post some pics of what happens when I am let loose with power tools,and tbh the results are very painful

I really cannot cut a straight line......

look at the mess of this one after i measured it wrong(but when the fan grills are on its not noticeable,luckily):

EDIT:just noticed that my feet look realllly small,lol

 

[JN]

Ouch...nice effort, but all I can say is I'm glad you did it on that case and not a LiLi

 

[nepas]

thats why I got a cheap old case rather than a nice costly one

but once i decide what to do with the bezel the front holes wont matter,and my OC3D fan grills cover the top disaster area,all it needs is a quick lick of paint and jobs a good'un(if you believe that you will believe anything,lol)

looks like I am gonna need a miracle for this bit as well

EDIT:this is what happens when you start attacking a case after 26 hours at work and 4 hours sleep

 

[Hassan]

Old Skool 2 New Skool.

When I first looked @ that case. Straight away it reminded me of them good ol' days.

 

[nepas]

have made some progress with the case (have fixed my rather bad cutting errors)will have loads of pics as soon as I can find my camera cable.Have just put my order in for my w/c gear

1 x 6mm Heatshrink - Black

1 x PrimoChill Anti-Kink Coils 3/4"- UV Blue

1 x 4mm Cable Braid - Black

4 x Blackfire4 Kameleon BLACK/UV BLUE LED

1 x 1/4" BSPP Ball Valve (FBBAVL14)

1 x 1/2" - 1/2" T Splitter (White Nylon)

1 x AcrylPanel™ 3mm - 480x480mm Black

1 x AC Ryan 12" Dual CCFL UV Kit

1 x AC Ryan 4" Dual CCFL UV Kit

1 x XSPC Full Cover Razor 8800GT/GTS (G92)

1 x Feser View 50ml Dye (UV Green)

2 x Yate Loon 120mm D12SH-12 - 2200 RPM

1 x 20/20 Plastic Polishing & Scratch Removal Kit

1 x Arctic Silver Ceramique (TPASCERM)

3 x Neoprene Rubber Edge Trim (PTNRT-1)

1 x 1/2" Clear High Flex Hose (XSPC)

12 x Mikalor Wormdrive Clip 3/4" OD (B12JC)

1 x XSPC Single 200 Bay Reservoir Pump - Clear

------------------------------------------------------