My Gold --- update: Light effects

[Azurite]

Hey Ole, the pics are down.

Probably been maintenance at imageshack or photobucket. You see them now right?

Ive cut out the bits that splits the two chambers. They are not screwed in yet but il do that right after i have meassured where the loop goes, and after ive drilled the holes i need. Soon i can start sanding down the inside and primerpaint it. Got alot of nightshifts coming up, but i think i can do some on the project in the evenings.

 

[yassarikhan786]

I can see the latest one, but not the ones at the bottom on the previous page. What size rads you looking to get in there?

 

[Azurite]

I can see the latest one, but not the ones at the bottom on the previous page. What size rads you looking to get in there?

Hmm maybe your router is messing with you?

I got two XSPC RX480(one is v2)

I uploaded the two pics to imageshack and reposted them.

 

[yassarikhan786]

Hmm maybe your router is messing with you?

I got two XSPC RX480(one is v2)

I uploaded the two pics to imageshack and reposted them.

I don't know why I couldn't see them, but they are fine now, thanks

 

[Perturabo]

Making your own leds is cool, are you doing single colour or RBG ones so you can mix whatever colour you want?

 

[Azurite]

Making your own leds is cool, are you doing single colour or RBG ones so you can mix whatever colour you want?

i had to google RBG led since i never heard of it. I am only doing single colour for starters. Have you tried those RBG leds?

 

[wassupdoc]

i had to google RBG led since i never heard of it. I am only doing single colour for starters. Have you tried those RBG leds?

They are awesome, you can match your pc/room to whatever mood your in. They are great if your bored too

 

[dugdiamond]

i had to google RBG led since i never heard of it. I am only doing single colour for starters. Have you tried those RBG leds?

BTW: if you google RGB instead of RBG, you may have better luck - lol

 

[Perturabo]

woops yes RGB might come up better

bloody G and B next to eachother...

Yeah ive played with them, they are quite fun to mod. They have a ground leg and then one leg for each of the individual colours. Each colour has a different operating voltage because of the different active material so it means you need to be careful not to blow them. But if you hook a few up together and have a 3 potentiometers (R G and

you can set the colour to whatever you like whenever you like. So really not much more difficult than the single colours.

 

[fcb]

The fans have arrived. Are those Bitspower compression fittings?

 

[Azurite]

BTW: if you google RGB instead of RBG, you may have better luck - lol

I was lucky then. Searched youtube for it and also ppc's.com and i found them right away.

woops yes RGB might come up better

bloody G and B next to eachother...

Yeah ive played with them, they are quite fun to mod. They have a ground leg and then one leg for each of the individual colours. Each colour has a different operating voltage because of the different active material so it means you need to be careful not to blow them. But if you hook a few up together and have a 3 potentiometers (R G and

you can set the colour to whatever you like whenever you like. So really not much more difficult than the single colours.

I looked at some ledcubes on youtube. Looks like fun to make so i might try it when im done with my current project. For the project im only going to make some single leds for lighting up two resorvoirs, the raystorm and the backside. I might do some more, but that is what i planed for starters.

The fans have arrived. Are those Bitspower compression fittings?

Yeah fans and lots of other stuff has arrived. Yeah Bitspower compression fittings/adapters only. Ive ordered waterblocks for my gpu's also so they be here soon

 

[Azurite]

A litle something i made. Cutted them and rounded the corners yesterday. Been hand sanding them with 240 grit this morning. These are stand offs for the motherboardtray and you will see them when the tray is screwed on.

Ive also made some nice holes for the tubing to pass trough. Going to sand those parts now.

 

[Azurite]

Working on these two parts now. Made holes for loop and also sanded it down alot. Going to mount it on the housing now and sand it one more time before primering it.

Chamber planks mounted and there is also on more lair of levelling compound. Been working on it since 06.00 am this morning so now im gonna relax rest of the day as i got a 10h nightshgift coming up tonight.

 

[daniSAUR]

Excellent job dude! Sanding looks the absolute bomb. Just beautiful

 

[Azurite]

Excellent job dude! Sanding looks the absolute bomb. Just beautiful

Thanks Dani. A few rounds with the sanding machine and its becoming even nicer.

Im also sanding lightly between each coat of paint.

 

[fcb]

This is really beautiful work. Those are motherboard spacers? Really love the sanding work on the wood.

 

[Azurite]

This is really beautiful work. Those are motherboard spacers? Really love the sanding work on the wood.

Thanks. They are feet/standoffs for the tray

 

[Jonnywb]

Just looked through the whole thread! This project's just beautiful, can't wait to see more!

 

[SEBAR]

Truly epic build log. Love the gold paint job you did on the MB tray and HDD cages. I look forward to seeing the next update.

 

[Azurite]

Just looked through the whole thread! This project's just beautiful, can't wait to see more!

Truly epic build log. Love the gold paint job you did on the MB tray and HDD cages. I look forward to seeing the next update.

Thanks peeps.

Im painting screwes and some cable holders im gonna use to hold the tubing. Also got 10 fans that needs a few thin coats of gold paint.

Had a quiet nightshift so i:

-ordered more tubing(clearflex) so now i almost got everything i need for watercooling except for destilled water. Il get that when im almost done. Found the right tubing here in my country but it was 10£ pr meter, so i ordered 5m from specialtech for 21£ incl shiping.

- ordered 90meter paracord(35£ lol). Its for next project btw -)