I cant for the life of me think of a clever name for this project but thats cool because im currently just reserving some space for it and letting you all know whats coming up. To be concise, i am building a case. The designs i have done so far are pretty much a cross between a shuttle and a tower (40cm wide, 50cm deep and ~35cm tall) with the motherboard tray mounted fairly centrally and the space behind the tray being used for the PSU + HDD and all wires being fed around the side / through the motherboard tray. The CD drive rack will be fixed to the floor of the case and paneled off to cut down on more visible wiring. It will be black, it will be big and the front will be made from gloss acrylic lasercut to the right specs (and maybe with an oc3d logo etched into it 
) with a nice big LCD screen and some snazzy brushed stainless steel buttons, 1 pwr, 1 rst, and then a line of 3stage switches to alternate UV/Green cathodes, fan speeds and anything else i can think of. Oh aaaand I'm going to make a 240x120 mm blow hole from left to right on the top of the front of the case with pressed aluminium mesh protruding slightly like seen on the temjin07.
So yea....stay tuned (im off to buy the aluminium to make the frame with ham in 5minutes)
) with a nice big LCD screen and some snazzy brushed stainless steel buttons, 1 pwr, 1 rst, and then a line of 3stage switches to alternate UV/Green cathodes, fan speeds and anything else i can think of. Oh aaaand I'm going to make a 240x120 mm blow hole from left to right on the top of the front of the case with pressed aluminium mesh protruding slightly like seen on the temjin07.So yea....stay tuned (im off to buy the aluminium to make the frame with ham in 5minutes)
