............maybe i'll have to post my setup to get some advice.........
below settins are by no means have any proof of it being stable! i've only been able to get into windows and after a few click about i switched it off! (reason at the end of post)
Commando board.
6300 @ 510 x 7 @ 1.4v(BIOS)1.37(asus probe)
Very high FSB, mine wouldnt boot past about 488 I think
Mem@1-1
PCI Express Freq - 120
Try auto or 100 or 101
PCI Clock Sync - 33.33mhz
Spread Spectrum - Dis
FSB Termination Voltage - 1.5v
NB VCore - 1.5v
Mem Voltage - 2.15v
DDRII Channel A Ref Vol - Auto <------- im interested to know about settings for this
I never got to find out what these 3 did, sorry 
'' '' B Ref Vol - Auto <------- im interested to know about settings for this
DDRII Controller Ref Vol - Auto <------- im interested to know about settings for this
SB VCore (SATA,PCIE) - 1.55v
SB Chipset Vol - Auto <------- im interested to know about settings for this
Changing this made no difference to anything on mine
Asus C.G.I. - Dis
Static Read Control - Dis
C1E - Dis
Max CPUID Value Limit - Dis
Vander Pool - Dis
CPU TM - En
DISABLED
Execute Disable Bit - En
DISABLED
PECI - Dis
anything you guys want to suggest at my dodgy setting?
and the reason why i havent done any stress test is because......im STILL waiting for those Commando blocks to come flying to a UK shop so i can buy them......at this moment, it has the stock intel HSF, and in TAT the temps are at 65c (asus probe@51)
soooo......lets get the ball rolling eh?
BTW Mr. Smith, thanks for your input, hows your Commando(ing) going? :O)
