GTX 560ti HAWK

chris8224

New member
Hello everyone,

I have recently been playing around with my 560ti by overclocking it and such.

I was just wondering what would be a good range of tests to put it through to test if it is stable.

So far i have been playing long gaming sessions on black ops, battlefield bad company 2, F1 2010 and gta iv mostly, i have run fur mark for a few hours and also the unigine heaven benchmarks for a few hours.

If there are any others i should run or do it would be much appreciated if you could tell me
biggrin.gif
.

Thanks, Chris
 
Hello everyone,

I have recently been playing around with my 560ti by overclocking it and such.

I was just wondering what would be a good range of tests to put it through to test if it is stable.

So far i have been playing long gaming sessions on black ops, battlefield bad company 2, F1 2010 and gta iv mostly, i have run fur mark for a few hours and also the unigine heaven benchmarks for a few hours.

If there are any others i should run or do it would be much appreciated if you could tell me
biggrin.gif
.

Thanks, Chris

Try the Lost Planet 2 benchmark. Play with the settings and then run test B...... That is a good one to stress your video card.
 
Can you post your OC progress please ? (temps,clocks, scores,..) I'm thinking of buying one or two myself but I might also buy the gigabyte one, so still doing some research
 
Can you post your OC progress please ? (temps,clocks, scores,..) I'm thinking of buying one or two myself but I might also buy the gigabyte one, so still doing some research

Mine is currently running at 1050 MHz with +150mV on vCore. (MSI Afterburner v2.2.0 Beta 4) Temp is 70°C (room temp is 29.4°C)

Deffo gonna push it harder to see what she's got...

** EDIT **

Seems FurMark isn't the tool it used to be... I ran 3D Mark 11 and it crashed at above clocks.]

Dropped clocks down to 990MHz GPU / 1100MHz Memory and dropped vCore to +100mV and all well.. (GPU temp @ 78°C)

URG.jpg
 
well so far i have my card running at 1050MHz on the core using the stock volts of 1050mV normal release AB or +0 if your using AB 2.2.0 beta 4 both versions of AB throughly tested and is 100% stable (not bad on stock volts if you ask me
biggrin.gif
)
 
well so far i have my card running at 1050MHz on the core using the stock volts of 1050mV normal release AB or +0 if your using AB 2.2.0 beta 4 both versions of AB throughly tested and is 100% stable (not bad on stock volts if you ask me
biggrin.gif
)

What are you using to stress your overclock??

It seems mine doesn't like too much voltage... since dropping the vCore to +100mV I have been able to push the GPU speed up to 1010MHz.... Will keep pushing
biggrin.gif


3D Mark 11 score
 
Also have you overclocked your vram, if you have i suggest putting it back to stock then find a stable core clock, then overclock the vram afterwards
smile.gif
 
Also have you overclocked your vram, if you have i suggest putting it back to stock then find a stable core clock, then overclock the vram afterwards
smile.gif

My previous OC on this card was 990MHz Core / 1115MHz Memory so I should be oki with mem at 1100MHz.

Your post rekindled my interest in overcloking it and I'm just happy I got the GPU clock over 1GHz
 
Back
Top