GTX 460 SLI PROBLEM NEED HELP!!
- Thread starter ComputerGenius
- Start date
"So it seemed to have been a combination of the video card and monitor not being compatible with each other." Tis is what that guy from the video said... but its very unlikely.
Try another sli connector if you have one or install older drivers. Something else you could try is to minimize all the graphics settings in the games and see if the problem is gone, including all filters... uhm... maby a pcie connector has some dust in it and doesnt make good contact. Try both cards in the second pcie slot, maby the slot is faulty.
If nothing works you should start thinking about RMA i'm afraid
Cheers
Try another sli connector if you have one or install older drivers. Something else you could try is to minimize all the graphics settings in the games and see if the problem is gone, including all filters... uhm... maby a pcie connector has some dust in it and doesnt make good contact. Try both cards in the second pcie slot, maby the slot is faulty.
If nothing works you should start thinking about RMA i'm afraid
Cheers
JezEngland
New member
Maby you've changed NVIDIA control pannel settings or summin.
I think you should re-install drivers and use the sweep option in custom install and if you don't use 3D don't install that. I've re-installed driver when there was a problem and it didn't fix it and i fixed it by deleting the driver. Because re-installing without deleting doesn't delete profiles, setting stuff and they are glitchy and after enabling SLI re-boot
I think you should re-install drivers and use the sweep option in custom install and if you don't use 3D don't install that. I've re-installed driver when there was a problem and it didn't fix it and i fixed it by deleting the driver. Because re-installing without deleting doesn't delete profiles, setting stuff and they are glitchy and after enabling SLI re-boot
ComputerGenius
New member
I LOVE U MEHNN ... no homo ¬¬ but i works, so it was a simple as deleting the drivers then reinstalling it again
im going to leave this thread up for people who might be in the same situation
thankksss
SmoulderingCircuits
New member
I LOVE U MEHNN ... no homo ¬¬ but i works, so it was a simple as deleting the drivers then reinstalling it again
im going to leave this thread up for people who might be in the same situation
thankksss
My flickering was about four times faster than that and affected any 2d text box etc on screen, but not the actual 3d game itself. RMA time, sir
ComputerGenius
New member
JezEngland
New member
I get 2d windows like internet pager flikering after enabling SLI so I re-boot and it works properly with SLI
Thanks ComputerGenius good luck
I LOVE U MEHNN ... no homo ¬¬ but i works, so it was a simple as deleting the drivers then reinstalling it again
im going to leave this thread up for people who might be in the same situation
thankksss
Dude thats what i meant by " reinstalling the drivers and deleting whats not needed. admitted i mightve been a little vague but.....
ComputerGenius
New member
i hate to say this but ITS BACKKKKKK T.T it reinstalled the drvers again but no luck ¬¬ sigh* back to square one
ComputerGenius
New member
tried it but no luck
have u tried changing the slots?
adamjamesroe
New member
try the cards in an other system if you can.
SmoulderingCircuits
New member
I never really tryed that, RMA'd straight away coz it kept shutting system down no matter how many times i rebooted.
SmoulderingCircuits
New member
i hate to say this but ITS BACKKKKKK T.T it reinstalled the drvers again but no luck ¬¬ sigh* back to square one
Exactly what i'm talking about! It goes away and clears up then soon as you think it's stopped BAM problems again!
ComputerGenius
New member
i was reading about online and some people have the same problem and it was the sli cables problem, so im going to have to buy one off ebay or something like that ¬¬
SmoulderingCircuits
New member
When i searched 5770 crossfire issues there was pretty much anything causing the problem, and it snuck back just like did with me
ComputerGenius
New member
if i finish all this i plan to do watercooling aswell and im wondering if a 200 lph will be enough for a cpu(i7 860 oc), 2 gpu (460s oc)and a 240 radiator? because the 460s are around 80 when gaming and when i run fur mark its like 85-90+
ComputerGenius
New member
yh i want to but because im going to mount my rad on top even with a 240 rad i still have to mod my case because there isn't enough clearance for the vrm mosfets and ram dims so either im going to have to seriously figure a way to mount a 360 rad or just use a really thick 240 rad with a push pull config
