Finally Won The Silicon Lottery :D

[Dicehunter]

I've never won the silicon lottery so this is an awesome thing for me.

The last 780 Ti before I had to donate it to a family member could only do 1200 on the core and 3600 on the memory.

My Reference Asus 780 Ti that arrived this morning that I have been busy benching to death is rock solid at 1300/3900

 

[Damien c]

Is that the boost speed or the base speed and then boosting on top of that?

I have not really played with mine, but they are stable at +150 on the core and +300 on the memory without touching the voltages.

Don't run them oc'd though as I have no need to at the moment.


It looks like you might have a decent card there though.

Also why is it only running at 8x?

 

[WYP]

Nice overclock!

 

[Dicehunter]

Is that the boost speed or the base speed and then boosting on top of that?

I have not really played with mine, but they are stable at +150 on the core and +300 on the memory without touching the voltages.

Don't run them oc'd though as I have no need to at the moment.


It looks like you might have a decent card there though.

Also why is it only running at 8x?

It's the base speed and then boosting on top and I have it in a lower PCI-E slot for looks mainly hence the x8, Haven't noticed any performance difference between running it at x8 or x16 though.

Nice overclock!

Thank you

I'm going to be modding the shroud in a couple of days, I'll post pics ^_^

 

[tinytomlogan]

It's the base speed and then boosting on top and I have it in a lower PCI-E slot for looks mainly hence the x8, Haven't noticed any performance difference between running it at x8 or x16 though.



Thank you

I'm going to be modding the shroud in a couple of days, I'll post pics ^_^

Use GPUZ monitoring to tell you what the max is

 

[Dicehunter]

Use GPUZ monitoring to tell you what the max is

Okees done, I ran valley for a few minutes to get the max -

Not sure if thats a spike or if thats at a steady rate, Will do more testing later, Either way though I'm chuffed to bits

 

[Wraith]

That is a sweeeeet OC right there dude, congrats on the lotto win

 

[Dicehunter]

That is a sweeeeet OC right there dude, congrats on the lotto win

Thank you

Still got lots more benching to do though ^_^

 

[SuB]

and this is with the ref cooler? Nicely done dude

I haven't even tried OC'ing my cards yet, everything's changed since my 580's!

 

[Dicehunter]

and this is with the ref cooler? Nicely done dude

I haven't even tried OC'ing my cards yet, everything's changed since my 580's!

Indeedy, Max temps I've seen so far are 79'c.

Tomorrow when I get time I'm removing the metal shroud and changing the colour to a matt black but keeping the screws silver and then just need to wait for the custom backplate

 

[tinytomlogan]

Okees done, I ran valley for a few minutes to get the max -

Not sure if thats a spike or if thats at a steady rate, Will do more testing later, Either way though I'm chuffed to bits

So its not boosting from the base?

 

[Dicehunter]

So its not boosting from the base?

It is boosting, Base clock is 1046, Using a modded bios.

 

[tinytomlogan]

It is boosting, Base clock is 1046, Using a modded bios.

Its should boost past your OC mate - depends what the tool is tbh

 

[Dicehunter]

Its should boost past your OC mate - depends what the tool is tbh

Indeedy, The bios I'm using disables boost 2.0 so the clock doesn't go down/throttle too much compared to the stock bios.

With this bios there's no middle point if that makes sense, It's either at 2d settings i.e 300mhz etc... or at max 3d clocks unlike the stock bios where it can range ingame or benchmarks.

 

[Cru]

Indeedy, Max temps I've seen so far are 79'c.

Tomorrow when I get time I'm removing the metal shroud and changing the colour to a matt black but keeping the screws silver and then just need to wait for the custom backplate

are you gonna leave the logo green or sand it down?

 

[tinytomlogan]

Ahhhhhhh well the GPUZ thing was to check the boost lol

 

[Dicehunter]

are you gonna leave the logo green or sand it down?

Sanding it down, According to a few that have done it, It takes maybe 5 minutes to do it carefully and looks really clean afterwards

Ahhhhhhh well the GPUZ thing was to check the boost lol

Well...yeah....fine...blonde moment lol ^_^

In short the card either runs at 300-400 idle or 1300 in 3d which is quite nice, Made a profile for 1200 though just to knock off a few degrees

 

[Cru]

Sanding it down, According to a few that have done it, It takes maybe 5 minutes to do it carefully and looks really clean afterwards

can confirm. have pictures in my rig gallery

 

[Dicehunter]

can confirm. have pictures in my rig gallery

Oooh yes just noticed, Looks amazing, I got told to use a 400 grit sand block/square, what did you use ?

 

[Cru]

Oooh yes just noticed, Looks amazing, I got told to use a 400 grit sand block/square, what did you use ?

don't exactly remember but could've been something like 400