800d case build log recon 50 cal

[GROUCHY]

On the water blocks. Hate to be harsh but this actually looks terrible.

oooo i see what you mean yeah i was thinking of taking the bolts out the water blocks but to be honest tom i have never like put a mobo water block on can you acctley do that ? like take all the bolts out the top mobo block ? it wont mess up the seals or anything ?

 

[tinytomlogan]

you just refit them after..........

You need to sort the cables etc too mate. Id almost tell you to start again tbh :/

 

[GROUCHY]

you just refit them after..........

You need to sort the cables etc too mate. Id almost tell you to start again tbh :/

cables on the mobo you see i am changing and if you mean the cables i done for the military switch i tryed molexes jsut to cramd and just to tight fit so i had to do it with the bullet connecters you cant see them anyways so its ok and them two bullet connecters that you see hanging are from the leds to the sunbeam sound controller thing and okay i take the bolts out the water block and re fit them in thanks for that tip i was really unsure about it

 

[GROUCHY]

how i am running the loop set up xD

 

[tinytomlogan]

the two single fan rads should be binned and you should have just used a thicker 240 in the bottom.

This is going to look far too messy. Plus I hate single fan rads, just pointless in this rig.

 

[GROUCHY]

the two single fan rads should be binned and you should have just used a thicker 240 in the bottom.

This is going to look far too messy. Plus I hate single fan rads, just pointless in this rig.

well the 140 is for the brake from the mobo to the gpus and the 120 jjust kinda more for looks and to cool the coolant from the 240 more since there no hdd cage and i only had the 120 and 240 layin around i got the hardware from the claim money so the rest is from wha i can get my hands on with the funds i got i cant get much so just putting up with what i got to be honest tom ! this is my first major mod build like with dremel and the first biggest water coolin i have ever done i ahve done cpu with 2 rads duel res but i never done a loop with 2 gpus mobo cpu 2 pumps duel res rads so im just a learning curve i am trying and with my condition makes it even harder but you know just life aint it

 

[tinytomlogan]

you dont need a rad between the cpu and the gpu's mate it does nothing.

 

[GROUCHY]

you dont need a rad between the cpu and the gpu's mate it does nothing.

yeah maybe it dont but like i kinda like it and from the coolant heat from the cpu and mobo that heat going in the gpus but with the rad it cools it down just a lil bit maybe wont do nuffin but its all good like i said all a learning curve

 

[GROUCHY]

o tom would it be better to have the ssds at the back of the mobo i dunno where to place them i was thinking by the 240 rad how you see in the pic but it wont fit due to the cables all being on the right it will fit if the if the left ssd was the other way around so the cables be on the left isntead of the right but it just look silly lol but where the psu and 240 rad you wont seee due to the middle shelf

 

[tinytomlogan]

putting a rad inbetwen the cpu and gpu wont cool anything more mate.

Its a closed loop it doesnt matter what order its in other than res then pump.

Ive been saying this in videos for sooooo long its unreal. You build a loop to be tidy.

This is just messy.

 

[GROUCHY]

yeah i know i am trying i just liked the idea having a 140 rad at the back too thats all bud it will be tidy when im done and hence why i have used no angle fittings just barbs and anti kink coil to make it look more nice when you see the tubes the longest tube is basicly the 360 to the cpu