The X pot

[Rasmus66]

Hi Guys

Just wanted to show you some pictures of my latest project i have been working on.

It's a half copper and half POM ln2 pot.

Total Weight of the pot is about 1,4 kg.

For making the copper bottom of the pot i used a very handy "little" tool we have were im working

A 3 axis cnc milling machine from Mazek.

Here is the POM top

A look inside the pot.

2 mm hole in the side of the pot for a temperatur probe.

Here after some polishing. I like shiny things

Complete pot with the 20 mm POM mounting bracket

Mounted on a MSI Big Bang Xpower motherboard

All dressed up and ready for some testing.

Really cold

And here is a small video i made when we tested it.

[media]http://www.youtube.com/watch?v=AP27vFibbkk[/media]

It can easily hold a 980X running a 5,9 ghz in vantage cpu test and it only takes 0,5 liters of ln2 to cool down the pot when you wanna start benching because of the low weight.

A slightly modified version of this pot will go intro production very soon

 

[Matthias2437]

Nice pot,like the mounting system on it. What temps are you getting with the 980x at 5.9?

 

[Rasmus66]

Nice pot,like the mounting system on it. What temps are you getting with the 980x at 5.9?

The temps needs to be around -150 celsius

My cpu has cold boot a -165 and vantage will not run the cpu test if the temps gets below -135.

 

[Rasmus66]

Made another X pot for a friend a few weeks ago.

Same internal design just with a bit thicker bottom and a higher pom top

My next project is a big gpu pot for single gfx benching

 

[Bungral]

Nice mate!

Always been interested in sub zero cooling but have never really got around to it.

 

[fredtrix]

Uberlate commen, but still really great work!

I like it a lot.

 

[KING_OF_SAND]

i like pot