The White Elephant
- Thread starter kaney
- Start date
AverageNinja
Average Penis Too
Looks good to me mate! Good work!Ok this looks much better.
andrewmchugh
New member
If he is using an internal exhaust GPU then having push from the top might work out better.
I would test both push intake and pull exhaust.
Hi frufsa,
absolutely i will boost the ram for sure, the Platinum ram is lovely a bit excessive but would be a shame no to fill all 8 slots on my Mobo, if my pocket will allow it I will top it off to 4gb kits to max it out at 32gb when finished, it will look good and go well.
absolutely i will boost the ram for sure, the Platinum ram is lovely a bit excessive but would be a shame no to fill all 8 slots on my Mobo, if my pocket will allow it I will top it off to 4gb kits to max it out at 32gb when finished, it will look good and go well.
Last edited:
BitFenix Spectre PRO 200mm Fan
Hi All,
Just a small update to 'The White Elephant'
I have replaced the stock front 200mm fan in my 600t SE with the BitFenix Spectre PRO 200mm all white and very nice.
It is actually much better than the stock and is pushing air in much much better so I think a good replacement and in keeping with the white case
All went in very easy.
Spec:-
900RPM
Air flow 148.72CFM
Air pressure 1.26mmH2O
Noise 27.5dB(A).
About to purchase GPU and SSD drives hopefully be with me very soon.
KANEY.
Hi All,
Just a small update to 'The White Elephant'
I have replaced the stock front 200mm fan in my 600t SE with the BitFenix Spectre PRO 200mm all white and very nice.
It is actually much better than the stock and is pushing air in much much better so I think a good replacement and in keeping with the white case
All went in very easy.
Spec:-
900RPM
Air flow 148.72CFM
Air pressure 1.26mmH2O
Noise 27.5dB(A).
About to purchase GPU and SSD drives hopefully be with me very soon.
KANEY.
Attachments
Last edited:
andrevautour
New member
Ok this looks much better.
great build. love your hardware!
this is just a small thing but have you considered routing the h100 fan cables to the left or right of the heatsink and then up and out? that's the way i did it in a built with the same rampage 4 motherboard recently.
Hi Andrevautour,
Thanks for the tip, it is definitely worth a look, and it does look pretty tidy, from your pic its look as though you have gone through a similar build.
To hopefully finish this build, tomorrow I will be making a few more purchases and then start testing this monster, for games (or course) and Modo for 3D rendering........ I cannot wait !!
I will start off at stock setting and see after a lot of research start overclocking this rig and hopefully find a 24/7 sweet spot.
to buy...
(8gb of extra ram Corsair Platinum, 180gb Force GT SSD and finally MSI Geforce N680GTX Lightning)
I will take pics of course to share this build.
KANEY
Thanks for the tip, it is definitely worth a look, and it does look pretty tidy, from your pic its look as though you have gone through a similar build.
To hopefully finish this build, tomorrow I will be making a few more purchases and then start testing this monster, for games (or course) and Modo for 3D rendering........ I cannot wait !!
I will start off at stock setting and see after a lot of research start overclocking this rig and hopefully find a 24/7 sweet spot.
to buy...
(8gb of extra ram Corsair Platinum, 180gb Force GT SSD and finally MSI Geforce N680GTX Lightning)
I will take pics of course to share this build.
KANEY
andrevautour
New member
Hi Andrevautour,
Thanks for the tip, it is definitely worth a look, and it does look pretty tidy, from your pic its look as though you have gone through a similar build.
To hopefully finish this build, tomorrow I will be making a few more purchases and then start testing this monster, for games (or course) and Modo for 3D rendering........ I cannot wait !!
I will start off at stock setting and see after a lot of research start overclocking this rig and hopefully find a 24/7 sweet spot.
to buy...
(8gb of extra ram Corsair Platinum, 180gb Force GT SSD and finally MSI Geforce N680GTX Lightning)
I will take pics of course to share this build.
KANEY
Hi!
Yes I recently built a system for my dad that has similar specs to yours. There are a few pictures here if you're interested: http://www.flickr.com/photos/andrevautour/sets/72157629505752597/
And here is the thread with pictures of my system: http://forum.overclock3d.net/showthread.php?t=45768
Hi Chris How do you break a H100 ? Are they easy to fix ? What's even the shelve life of one of these ?
........sorry for all the questions !!
Last edited:
PureTek Gaming Pad
Infact WillSK check this out, it may be too late as you have made a new purchase BUT this was reviewed fairly recently by TTL and an excellent choice if you ever fancy another change of your pad.
check out the review -
http://www.youtube.com/watch?v=0c8KYf8DDb4&list=UU_SN80_V2GymyCWM2oTYTeg&index=9&feature=plcp
KANEY
Awesome WillSK cool build, I even down to the mouse matt !!!
Infact WillSK check this out, it may be too late as you have made a new purchase BUT this was reviewed fairly recently by TTL and an excellent choice if you ever fancy another change of your pad.
check out the review -
http://www.youtube.com/watch?v=0c8KYf8DDb4&list=UU_SN80_V2GymyCWM2oTYTeg&index=9&feature=plcp
KANEY
Attachments
great build. love your hardware!
this is just a small thing but have you considered routing the h100 fan cables to the left or right of the heatsink and then up and out? that's the way i did it in a built with the same rampage 4 motherboard recently.
Hi Andrevautour,
what do we think 3rd time lucky !?!?
Also checked out links for your Build logs Twin GTX560, some serious kit in there for sure, they both looked great !
KANEY.
Attachments
andrevautour
New member
Hi Andrevautour,
what do we think 3rd time lucky !?!?
Also checked out links for your Build logs Twin GTX560, some serious kit in there for sure, they both looked great !
KANEY.
Hey! yes, that looks good to me
for my dad's system he likes to play games like crysis 2 in 3d so lots of power needed for that, but definitely a crazy powerful /overkill system even for the best looking games in 3d. thanks for looking
have you gotten your system running yet? how are you liking it so far? the corsair dominator platinum ram is really great looking. i like it a lot!
Hello all,
okay a couple of more goodies have arrived today so will get these in as soon as possible.
I have Windows 7 on its way and then just left with the FINAL purchase of the GPU so unfortunately Andrevautour my system isnt up and running yet just need the GPU and then hopefully sorted I cant wait to be honest but I have to watch my funds cause this little baby is a bank breaker !!
but i knew that when I got into this build.
Already thinking of the next build as this baby tips more towards a bit of a workstation. But for the next rig I want an all out dedicated gaming machine for home maybe a 2600K with a good dose of overclocking !
I will of course do my research but I really would like the best balance of power and cost ............ as in keep COSTS DOWN as always all advice is welcome, BUT will get into this in due time.
KANEY
okay a couple of more goodies have arrived today so will get these in as soon as possible.
I have Windows 7 on its way and then just left with the FINAL purchase of the GPU so unfortunately Andrevautour my system isnt up and running yet just need the GPU and then hopefully sorted I cant wait to be honest but I have to watch my funds cause this little baby is a bank breaker !!
but i knew that when I got into this build.
Already thinking of the next build as this baby tips more towards a bit of a workstation. But for the next rig I want an all out dedicated gaming machine for home maybe a 2600K with a good dose of overclocking !
I will of course do my research but I really would like the best balance of power and cost ............ as in keep COSTS DOWN
as always all advice is welcome, BUT will get into this in due time.KANEY
Attachments
Last edited:
