SKEEPER - custom business card.

The next item is the Gigabyte GA-Z270X-DESIGNARE

nG7zy1c.jpg


chzPmDT.jpg


qtfmctP.jpg


KNnB2bo.jpg


ZWxzmyy.jpg


vOMWk6J.jpg
 
The whole unit will be powered by EVGA SuperNOVA G3 1000W

BooRjZg.jpg


Which cables will get white braids

wUYRnZL.jpg
 
Last edited:
Aorus AC300W housing is small, you need to get a little tired to fit everything.
1000W crammed in only 15cm deep (apparently it is one of the smallest power supplies of such a high power), definitely helped me in crushing all the cables to the basement.

PQtZxpu.jpg
 
Last edited:
The project has been applied to the Alphacool Eisbecher D5 150mm reservoir, which has the ability to do IN from the top (through the upper cork). In the set with the reservoir there is even a suitable nozzle, which is mounted in the upper plug.
The problem is that the top cork has only one hole and after using the reservoir in the "IN from the top" configuration we do not have it as fill.
That's why I made an extra small opening, but it was quite sufficient to fill the system with a wash or syringe with a catheter.


AEHEl86.jpg


HfCSq1v.jpg


yIa8giS.jpg
 
Done.


Spec. :
Case - Aorus AC300W
Motherboard - GIGABYTE GA-Z270X-DESIGNARE
Graphics Card - AORUS GTX 1080 Ti Waterforce WB Xtreme Edition
SSD - GOODRAM IRIDIUM PRO 240GB
SSD - GOODRAM IRDM ULTIMATE M.2 2280 240GB
SSD - GOODRAM IRDM ULTIMATE PCI-e 2280 240GB
RAM - GOODRAM DDR4 IRDM 2400 16GB (4x4)
PSU - EVGA SuperNOVA 1000 G3
Liquid cooling: Alphacool - Aquatuning
Reservoir - Alphacool Eisbecher D5 150mm Plexi
Connectors - Alphacool 16mm
Radiators - Alphacool NexXxoS ST30 Full Copper 360mm + 120mm
Pump - Alphacool VPP655
CPU water block - Alphacool Eisblock XPX CPU - polished clear version
Combs - Alphacool

7A6u4Tz.jpg


2FPkhN1.jpg


cvoXY4e.jpg


bcYSFFt.jpg


aEuXFZO.jpg


0zMNo7F.jpg


lYWO6NT.jpg


pQR46Th.jpg


7YnzJoy.jpg


xvLHgiG.jpg


gmaPFj1.jpg


VVSzvJV.jpg


edL7Wk9.jpg


y1uvRZu.jpg


32LxLah.jpg
 
Last edited:
The projects have been prepared for IFA Berlin.
As far as I know, IFA Berlin is the largest consumer electronics trade fair in Europe and the second in the world.
I had the pleasure of spending one day there and believe me that the fair is huge - at least three days to get to know everything.
I am about 560 km to Berlin, but it was worth it.

Goodram introduces new M.2 SSDs and 3000 MHz memory.
EVGA and Aorus are of course equipped with all this.

Below are some photos from the fair and a short film (more on the Internet).

TC8j5Df.jpg


koQFpxX.jpg


Dbm771s.jpg


https://www.youtube.com/watch?v=gGI7lLgAeEo
 
I will refresh the subject after a long absence and I will show you the reservoir I last made for a friend.

It is quite large - 460 x 214 x 35.

V6PKZhc.jpg


hcJY5mn.jpg



gASFaMa.jpg


x6LxRJE.jpg


z13CBAf.jpg


jUWpHqt.jpg


T3rBjQ9.jpg


gx5XfZu.jpg


O4udhD6.jpg


EQ95V6a.jpg


GtfGPzZ.jpg
 
Hello after a long break.
A friend asked me to make a water block for him for the EVGA X299 Micro 2 motherboard.
To make such a block, I needed this motherboard at home so that I could dimension it precisely and create a model that looks like this:

oOBylQk.jpg


GVcZMlK.jpg
 
So we start working



We mill copper



69VT2fd.jpg




We remove the allowance



xjY4mvu.jpg




Now we do the TOP cover and engrave



fW8h9Xf.jpg




Trying



HIyoydj.jpg




It fits perfectly



RvFpDgf.jpg




The engraving came out great



fE7ue3I.jpg




medfa4G.jpg




Sw9o0uX.jpg




Entire



SKBSN8b.jpg




qSwssgJ.jpg
 
Back
Top