OCZ 3700EB + Ramsinks + 40mm Deltas

[Brwmogazos]

Got my ram today after a week waiting finally for them to come from ireland so without any questions i had to remove the heatspreaders...apply some coolermaster ramsinks which i found soooo cheap arround £4 so i bought 4 packs

and 2x40mm delta fans which i also found cheap for £3.50 for their cooling...

i havent had any fun with them yet... tbh just a little bit...

here are some pics of the sticks

Micron chips on them...

Fitted with 2 x 40mm deltas the ramsinks are really cold to the touch...need to up the volts i guess...

I tested quickly with memtest before fitting the ramsinks on...

and the sticks passed loops of memtest @ 230 2.5 2 2 6...

thats with 3.05 which is my lowest my board can do at the mo due to the volt mods...235 gave me loads of errors They dont like messing arround with any settings other than the usual timings...on my P4C800E or the GAT settings of the abit boards as its already known...

@ 3 2 2 6 i wasnt able to get them stable at 250fsb...i need to play with them and see what they can do too with 3.35V...

 

[cowboy]

lo m8 thats pretty cool is there much improvment on the heatspreads compared to the standard ones lol might have to try that not sure about the fans though dont think my psu can take much more o well give it a try whats the worst thing that can happen

 

[Brwmogazos]

little update before i leave for work

it seems that they didnt like Dram Burst of 8 so i moved to 4

now they are memtest error free @ 240fsb 2.5 2 2 5

3.05V i removed the fans from the ramsinks cos they are held with seal string from the mach 2 gt i got and due to the temp they started moving downwads a bit..

i will let them run prime at 240(havent tried higher...no time) for all night till i get back home and see whats going on

oh

sandra bench buffered is

5777

5863

Unbuffered

3351

3417

 

[mlingard]

me waits for some uber memory results from brw , i like the look of them installed aswell .

 

[Phil Stanbridge]

funny, with my FX53 @ stock, ram @ stock, 2.5,2,3,5 or thereabouts I am getting 6,000 mb/s in Sandra.

 

[Brwmogazos]

another update

242fsb memtest loops of test 5 about 20 and no errors...

i stuck the delta fans on them now..

i did some burning in last night....8 hours blend test with prime

and a bit of 3dmark

i will burn them with 3dmark now at 242... @ 2.5 2 2 5 3.05V

update....8 and a half hours prime error free...looking good

seems that these sticks have waken up