Conchubair
New member
woo, its spaghetti for dinner tonight!
Night Photo Thread
- Thread starter tinytomlogan
- Start date
JessePalacio
New member
=)
Surfie
New member
Well, here is my humble submission...
Project Name: Project DSV
Build Log: http://forum.overclock3d.net/showthread.php?t=57668
Speification Highlights:
NZXT Phantom 630
Asus Rampage IV Formula (was an extreme, but it died, and I couldn't afford direct replacement)
Intel 3930K
32GB Corsair Vengence Memory 1333
MSI Twin Frozr III GTX 680
2 x Samsung Evo 512 SSDs
2 x Western Digital 1TB Mechanical Drives
1 x Western Digital 2TB Mechanical Drive
Corsair RM750 PSU
Alphacool UT60 360mm full copper rad
Alphacool UT60 240mm full copper rad
5 x Corsair SP120 QE fans
XSPC Photon 170 Combo (res and pump)
XSPC Raystorm CPU Block
XSPC Razor GTX 680 Block
XSPC Fittings (chrome black where possible) fittings used throughout
NZXT braided white LED
3 x XSPC 3mm LEDs
Case lights off:
Case lights on:
From a 3/4 angle with a little distance (about 1 meter):
Project Name: Project DSV
Build Log: http://forum.overclock3d.net/showthread.php?t=57668
Speification Highlights:
NZXT Phantom 630
Asus Rampage IV Formula (was an extreme, but it died, and I couldn't afford direct replacement)
Intel 3930K
32GB Corsair Vengence Memory 1333
MSI Twin Frozr III GTX 680
2 x Samsung Evo 512 SSDs
2 x Western Digital 1TB Mechanical Drives
1 x Western Digital 2TB Mechanical Drive
Corsair RM750 PSU
Alphacool UT60 360mm full copper rad
Alphacool UT60 240mm full copper rad
5 x Corsair SP120 QE fans
XSPC Photon 170 Combo (res and pump)
XSPC Raystorm CPU Block
XSPC Razor GTX 680 Block
XSPC Fittings (chrome black where possible) fittings used throughout
NZXT braided white LED
3 x XSPC 3mm LEDs
Case lights off:
Case lights on:
From a 3/4 angle with a little distance (about 1 meter):
IMHO your Raystorm needs to be white on there too Surfie?
Surfie
New member
Truth be told; I had never even considered an alternative colour to red for the Raystorm until I read this.
To be honest, if I had Corsair Dominator Platinums, with the Red bar, I would 100% agree with the sentiment, because this would just set them off beautifully. As it is though, those RAM sticks don't even have heat spreaders, let alone anything else, and I think white would just attract attention to that fact.
Two upgrades needed then - heatsinks and a couple white LED's 
Surfie
New member
Two upgrades needed then - heatsinks and a couple white LED's
Three: The NZXT fan needs to be swapped out for a Corsair AF140 QE - but I concede your point.
You can get some good heatsinks you could put on the ram for the price of a pizza
FoodStampz
New member
chewythefirst
New member
love it picture in a picture, also your rig looks neat and tidy
Xenomorphical
New member
Project Name: None really
Build Log: http://forum.overclock3d.net/showthread.php?p=739714#post739714
Specification Highlights:
CM Storm Trooper case with sidepanel
Asrock Extreme 7, x79, socket 2011
Intel I7 3820 @ 4.2GHz
16 Gb Corsair Vengeance 1600 (1.5v)
Asus 760 OC DirectCU II
Cooler master Silent PRO M2 1000watts
Onboard audio
Corsair Force GT 60GB SSD (OS)
Western Digital Green 500 GB (games)
Corsair H100 with Corsair SP performance edition in push
6x Corsair AF120 LED white fans
Bitfenix Alchemy 30cm white LED's
Scyte 8 channel fan controller that controls each fan seperately in the case
The front fans don't look that blue irl but i messed up the pic in photoshop lol
Also the LED strip is hooked up to the original light switch of the case,
so i can turn it on and off if i want with the button on top
Build Log: http://forum.overclock3d.net/showthread.php?p=739714#post739714
Specification Highlights:
CM Storm Trooper case with sidepanel
Asrock Extreme 7, x79, socket 2011
Intel I7 3820 @ 4.2GHz
16 Gb Corsair Vengeance 1600 (1.5v)
Asus 760 OC DirectCU II
Cooler master Silent PRO M2 1000watts
Onboard audio
Corsair Force GT 60GB SSD (OS)
Western Digital Green 500 GB (games)
Corsair H100 with Corsair SP performance edition in push
6x Corsair AF120 LED white fans
Bitfenix Alchemy 30cm white LED's
Scyte 8 channel fan controller that controls each fan seperately in the case
The front fans don't look that blue irl but i messed up the pic in photoshop lol
Also the LED strip is hooked up to the original light switch of the case,
so i can turn it on and off if i want with the button on top
Project Name: None really
Build Log: http://forum.overclock3d.net/showthread.php?p=739714#post739714
Specification Highlights:
CM Storm Trooper case with sidepanel
Asrock Extreme 7, x79, socket 2011
Intel I7 3820 @ 4.2GHz
16 Gb Corsair Vengeance 1600 (1.5v)
Asus 760 OC DirectCU II
Cooler master Silent PRO M2 1000watts
Onboard audio
Corsair Force GT 60GB SSD (OS)
Western Digital Green 500 GB (games)
Corsair H100 with Corsair SP performance edition in push
6x Corsair AF120 LED white fans
Bitfenix Alchemy 30cm white LED's
Scyte 8 channel fan controller that controls each fan seperately in the case
The front fans don't look that blue irl but i messed up the pic in photoshop lol
Also the LED strip is hooked up to the original light switch of the case,
so i can turn it on and off if i want with the button on top
FINALLY, SOMEONE ELSE WITH THE SAME KEYBOARD AS ME!!!! Anyhow, nice looking rig, very tidy
.Project name: The Monolith
Rig Gallery: http://forum.overclock3d.net/showthread.php?t=54697
Specifications:
NZXT Switch 810
Corsair AX850 + Blue Corsair individually braided cables
Asus P8P67 Pro Rev B3
Intel i5 2500k
16GB Corsair Vengeance 1600MHz Blue/Black
Zotac GTX580 1536MB
Gainward GTX580 1536MB
Asus Xonar D2
OCZ Vertex IV 128GB (I'm one of the lucky ones)
Hitachi 1TB HDD
Samsung Bluray RW
NZXT 2m braided LED cable
Watercooling Specifications:
Swiftech MCP655 Vario
Alphacool acrylic D5 pump top
FrozenQ Fusion 250mm reservoir - Blue helix
EK Supreme LTX waterblock
2x Aquagrafx GTX580 waterblock
Phobya G-Changer 240mm x 60mm radiator
Phobya G-Changer 360mm x 60mm radiator
Primochill Vortex flow indicator
Masterkleer tubing
EK compression fittings
Mayhems X1 blue coolant
I can't stand the orange and green LEDs on the soundcard and motherboard :/ Maybe a desolder job
Serius it looked awsome With the Orange there looked like the "heart" of the computer
ChronoCabal
New member
Figured that the new pics I've just taken of mine will fit in perfectly here!
IMG_0083 by ChronoCabal, on Flickr
IMG_0093 by ChronoCabal, on Flickr
IMG_0068 test by ChronoCabal, on Flickr
IMG_0083 by ChronoCabal, on Flickr
IMG_0093 by ChronoCabal, on Flickr
IMG_0068 test by ChronoCabal, on Flickr
Last edited:
Figured that the new pics I've just taken of mine will fit in perfectly here!
It certainly does, that tubing looks sweeeet, making me think I need tubes more and more =00=
Me and my rig have been working long into the night recently, well because race car! Not a bad excuse really, I just thought I would spend some time admiring while waiting for a render as well as getting my camera eye-in for the Corsair competition.
Project Name: JR23's rig
Rig Gallery: http://forum.overclock3d.net/showthread.php?t=60062
JR
Devildog83
New member
district_11
New member
Thread; http://forum.overclock3d.net/showthread.php?t=58421
Corsair C70 case (Black)
i7 4770k
16GB 1866MHz Dominator Platinum RAM + Light bar upgrades
Sabertooth Z87 Motherboard
SLI EVGA GTX 780 Classified + Backplates
Corsair H100i CPU cooler
Samsung 840 EVO 250GB SSD
2 WD Green 2TB HDD
AX860 PSU, with individually sleeved cables
Lamptron fan controller
4 Bequiet Silent Wings 2 120mm fans
3 Corsair SP120 Quiet Edition 120mm fans
Corsair C70 case (Black)
i7 4770k
16GB 1866MHz Dominator Platinum RAM + Light bar upgrades
Sabertooth Z87 Motherboard
SLI EVGA GTX 780 Classified + Backplates
Corsair H100i CPU cooler
Samsung 840 EVO 250GB SSD
2 WD Green 2TB HDD
AX860 PSU, with individually sleeved cables
Lamptron fan controller
4 Bequiet Silent Wings 2 120mm fans
3 Corsair SP120 Quiet Edition 120mm fans
FINALLY, SOMEONE ELSE WITH THE SAME KEYBOARD AS ME!!!! Anyhow, nice looking rig, very tidy
I have this Keyboard too.
lol, couldn't be said better :lol:!
