My New Baby
- Thread starter fatty
- Start date
N
nick25
Guest
sweeeeeeeeeeeeeeeeeeeeeeet 
maverik-sg1
New member
Most brilliant fatty mate.
Wot does the new coil do for the temps?
Also, on the P160 case Scorchio mounted the single rad on the outside of the 120mm exhaust on his case - mainly due to space - is that something you would do?
The Coach
Just to add - I have seen phase coolers with a fatter rad (condenser?) at the front - any thoughts on what this does for ya?
And on that subject for a normal mach with Lian li kit- I was thinking about putting a 2nd rad in front of that rad (sandwiched behind the lian li front) - do you know if this will help?
Cheers
The coach
Wot does the new coil do for the temps?
Also, on the P160 case Scorchio mounted the single rad on the outside of the 120mm exhaust on his case - mainly due to space - is that something you would do?
The Coach
Just to add - I have seen phase coolers with a fatter rad (condenser?) at the front - any thoughts on what this does for ya?
And on that subject for a normal mach with Lian li kit- I was thinking about putting a 2nd rad in front of that rad (sandwiched behind the lian li front) - do you know if this will help?
Cheers
The coach
Mindless-Moron
New member
Congratulations its a boy, fatty by any chance are you black?
thats looking cool man cant wait to see it finished.
thats looking cool man cant wait to see it finished.
The bigger rad is for better capacity so it may help but the rad is designed for the usage so 2 may hinder and not help
I may mount the 120.1 on the outside I am unsure yet will see I like it inside if it fits keeps it neat but then on the outside better cooling hmmmmmm
Also the coil is used for more pressure drop so lower temps my temps wont be disclosed until I stick all my stuff together
OMG must have been the milkman
I may mount the 120.1 on the outside I am unsure yet will see I like it inside if it fits keeps it neat but then on the outside better cooling hmmmmmm
Also the coil is used for more pressure drop so lower temps my temps wont be disclosed until I stick all my stuff together
Mindless-Moron said:
OMG must have been the milkman
Phil Stanbridge
New member
She's (or he's) a beaut mate. I love the argyle braiding, its soooo Scottish. I reckon we'll see some fine benchmarks in due course - the watercooling loop has had us scratching our heads for some time. We didnt know how best to approach this one. We considered mounting the rad in the top panel, but Fatty went with the easiest option and stealing the 120mm rear blowhole. My only concern is heat inside the case once the panels are on - but time will tell. I know Fatty's got a few tricks up his sleeves for this too.
We will sort it Phil owes me a couple of blow holes loooool
Playen with some settings and stuff will try get some pics up
http://valid.x86-secret.com/show_oc?id=32956
Playen with some settings and stuff will try get some pics up
http://valid.x86-secret.com/show_oc?id=32956
Phil Stanbridge
New member
Not bad mate - 3.6 is a definite improvement over the GT - and its early days. Lets hope you can sort out the memory problems.
imported_Tim
New member
woow! It's full, do you have a window?
GoLLuM4444
New member
Looks nice. It's a little odd that you can see the inside through the reservoir though. Is that pi with 2gb 2t 'cause you're only a second shy of my 57 with bh-5 at 1t? Also how's my chiller coming along?
PHILIP1193
New member
do with some bigger pics mate please i cant work out yr w/cin loop too well as trhey are too small
phil
phil
