My Gold --- update: Light effects

[yassarikhan786]

Hi guys & gals. Sorry for no prgress lately. Our kid have been sick with flu and bad fever, so i havent had any time for the project. Packages from USA should be here soon, so il update with some pictures when i get it . Oh i also recieved my blue ray writer

SB-E launch is closing in .....

No worries mate, your daughter is your number 1 priority and I hope she get's well soon

.

 

[Azurite]

Got a package from performancepc's.com waiting at post office.

Il post a few pictures of the content later tonight

 

[yassarikhan786]

Got a package from performancepc's.com waiting at post office.

Il post a few pictures of the content later tonight

Nice

.

 

[dipzy]

Working on the two sideplanks that will hold the rads. Almost finnished first one, but i need to tap out on the surface so the radgrill is even with rest of surface. Sanding and painting later when the top floor is done.

I bought a hand jigsaw, and that worked nicely. Used that first and when the cut was long enough i switched to a better handsaw for wood. This part i really enjoy, and i notice how mutch quicker i work. Will update some more tonight when i have checked that the fans fits ok, and when the radgrill is fitted.

Looking good, mate, this going to be awesome when completed.

Just noticed you have the same Arsenal mug as me

 

[SmoulderingCircuits]

You're brave to have sawn that on the same desk as your rig is on/ at - you'll be picking bits of saw dust and shavings out the grooves and keyboard for the next couple weeks

 

[Azurite]

You're brave to have sawn that on the same desk as your rig is on/ at - you'll be picking bits of saw dust and shavings out the grooves and keyboard for the next couple weeks

Do you mean my lap? not a problem at all. I used a hand saw that dosnt leave mutch small dust and i cut it far away from it. Also used a vacuumcleaner after very time i used the saw. And....the lap top is 7 years old, so i really dont care

 

[SmoulderingCircuits]

Do you mean my lap? not a problem at all. I used a hand saw that dosnt leave mutch small dust and i cut it far away from it. Also used a vacuumcleaner after very time i used the saw. And....the lap top is 7 years old, so i really dont care

Oh, it looked like a keyboard infront of a monitor in the background

 

[Azurite]

Oh, it looked like a keyboard infront of a monitor in the background

Dont think i had it on table when i sawed. I usually use it when i install new systems. Anywas, i wouldnt cry if it broke

Picked up the package from performancepc's.com, and it was the fittings, angle, plug connectors. Il post some pictures later on when i got second package from them.

To busy playing BF3

 

[Azurite]

Our kid had an inflammation, so i didnt get any time for project work during my freeperiod. She's taking penicelin and starts to get well now, so il be continuing with the project in this midweek. Im at nightshift now and also got work next weekend. Then its another freeperiod coming up, so il guess il be doing good progress then.

SB-E is closing in, and im very exited about the performance of it. Hoping to find a good high end MB that fits my modd theme. As it looks right now, i will most likely get the UD5. If they launch a UD7 with black pcb and goldpainted blocks i would get that straight away. Got a fealing the UD7 will only be orange themed like we have seen at pre launch pictures.

 

[fcb]

Our kid had an inflammation, so i didnt get any time for project work during my freeperiod. She's taking penicelin and starts to get well now, so il be continuing with the project in this midweek. Im at nightshift now and also got work next weekend. Then its another freeperiod coming up, so il guess il be doing good progress then.

SB-E is closing in, and im very exited about the performance of it. Hoping to find a good high end MB that fits my modd theme. As it looks right now, i will most likely get the UD5. If they launch a UD7 with black pcb and goldpainted blocks i would get that straight away. Got a fealing the UD7 will only be orange themed like we have seen at pre launch pictures.

Glad to know your daughter is getting better now.

Yup, SB-E is just around the corner. Can't wait to see how it'll perform. Definitely hope Gigabyte will stick with the black and gold theme.

 

[Azurite]

DBL posted when server went down...

 

[Azurite]

Glad to know your daughter is getting better now.

Yup, SB-E is just around the corner. Can't wait to see how it'll perform. Definitely hope Gigabyte will stick with the black and gold theme.

Yeah, crossing fingers.

Heres an update on the parts that have recently arrived. These fittings and angle connectors are lovely. Will change the o-rings to blue ones.

Recieved my SS TJ08-E for my lan rig

 

[fcb]

Yes, the TJ08-E is finally here! Really like the white BluRay drive. Beautiful daughter by the way.

 

[yassarikhan786]

I'm loving the white BluRay drive as well and there are some very nice parts indeed. I see you have a little helper as well

. Good to hear about your daughter getting better

.

 

[Azurite]

Yes, the TJ08-E is finally here! Really like the white BluRay drive. Beautiful daughter by the way.

I'm loving the white BluRay drive as well and there are some very nice parts indeed. I see you have a little helper as well

. Good to hear about your daughter getting better

.

Tx guys. Im exited about how this will end... Hoping for a very silent system with great temps

 

[dipzy]

Yeah, crossing fingers.

Heres an update on the parts that have recently arrived. These fittings and angle connectors are lovely. Will change the o-rings to blue ones.

Im loving that drive, you've persuaded me to get one now

Again awesome effort your putting into the build, i hope it turns out the way you want and can't wait to see it finished.

 

[Solidarity]

That's a mighty fine looking drive you have there.

 

[Azurite]

I have decided for the UD5 and the 3930k. Will order it asap when they have it in stock here in Norway. This MB will fit in nicely with my modd

Need to hurry up now so i can get my wc up and running...

 

[fcb]

I have decided for the UD5 and the 3930k. Will order it asap when they have it in stock here in Norway. This MB will fit in nicely with my modd

Need to hurry up now so i can get my wc up and running...

That's awesome. Not waiting on the UD7?

 

[Azurite]

That's awesome. Not waiting on the UD7?

Looks like the x79 UD7 will be with only the orange theme. But, im not sure, so im gonna write Gigabyte a mail and ask if they will launch another UD7 for the x79.

I can run 3 graphicscards with UD5, and for me, that will be enough. I also got thumbscrews for the MB that came with one of the Lian Li chassis'es, witch i am planing to paint gold. I have never o.c with a Gigabyte MB, and i hope it isnt to mutch hazzle compared to the Asus mb's.