Help with ram

[alicarve]

I'm having trouble running my ram at 2000mhz tried so many settings and none seem to work

currently got them running at 1600mhz 6-7-6-18 would i notice alot of difference if i was able to get them to run at the speeds they are meant to and any ideas what i could try to get them upto speed? thanks

 

[Diablo]

You won't really see any difference. When you say difficulties, what do you mean. Try dropping the timings to something like 9-9-9-24, then dropping the divider to get them to the 2000MHz. What voltage are you running the RAM at? 1.64 may be needed, as may a bump in the VTT.

 

[SnW]

What is the SPD on that memory? note: not that that is always correct....

but as said lower the timmings those are pretty tight IMO...

 

[alicarve]

You won't really see any difference. When you say difficulties, what do you mean. Try dropping the timings to something like 9-9-9-24, then dropping the divider to get them to the 2000MHz. What voltage are you running the RAM at? 1.64 may be needed, as may a bump in the VTT.

yeah i have them set at default of 9-9-9-24 wouldnt try anything lower lol, voltage wise been trying 1.65, if i increase it to 1.67 it can boot to windows but crashes.

shadow im not sure what spd means sorry

also tried using the xmp profile but no luck

 

[alicarve]

ok got it working and seems stable but we will see, all i did was disable load-line calibration

just ran 3d mark vantage and it has taken scores down by 1000? hmmm

 

[SnW]

If you use CpuZ you can see the SPD timmings given by the manufactory.

see picture,

Also don't try to go any higher on the memory Voltage, not recommended...