.:Filtration:. - Finished - New Video
- Thread starter Skorchio
- Start date
Sorry there has been no update for a while, everything seems to go wrong having issues after issue with the laser cutting.
This weekend i final has all the parts to complete the PSU!
First i tried one of the GFX card cables.
Next i moved on to the customer connecter that will power the cd drive fan and HDD.
Close up on the cat? Ok...
One fluke was the sata cable.... Very lucky it fitted.
Then i tried to put it in the PC and i would not fit the hard drive was round the wrong way.. DOH. So lucky i made the power cable for the HDD long. Wow.. Lucky twice within 30 mins... Not like this build!
Then it was on to the 24 extention cable.
Then on to the PCU itself.
I cut off the 5v “fan” cables.
Off with the 4pin CPU cable.
Then i made a face with the mess..
Cable all ready.
First one done!
Finished.
Testing.
Now all I’m waiting for the lasering till i can finish it. Also i think im going to re-wire all the pumps and fans.
More soon (or not haha)
Skorch
This weekend i final has all the parts to complete the PSU!
First i tried one of the GFX card cables.
Next i moved on to the customer connecter that will power the cd drive fan and HDD.
Close up on the cat? Ok...
One fluke was the sata cable.... Very lucky it fitted.
Then i tried to put it in the PC and i would not fit the hard drive was round the wrong way.. DOH. So lucky i made the power cable for the HDD long. Wow.. Lucky twice within 30 mins... Not like this build!
Then it was on to the 24 extention cable.
Then on to the PCU itself.
I cut off the 5v “fan” cables.
Off with the 4pin CPU cable.
Then i made a face with the mess..
Cable all ready.
First one done!
Finished.
Testing.
Now all I’m waiting for the lasering till i can finish it. Also i think im going to re-wire all the pumps and fans.
More soon (or not haha)
Skorch
Ok small update, had the other week off to get my paladin to lvl 85.. hope you have all done the same!!!
Update time!
Takeing off the fittings for the old side panels.
Lasering done.
Fitting stuck on with blue tac.
Trial fitting, does not sit right because its held on by blue tac
.
More bad news tho, i ordered a new res (cause one leaked) and the new one leaked.. lol, so in the last photos you can see the first leaky one in place, and the 4th one is a scratched one i have had since the start of the build. Also you will notice the filter paper on the floor is all ripped, im changing the way this works slightly... But I'm waiting for the replacement res before i can do anything
Skorch
Update time!
Takeing off the fittings for the old side panels.
Lasering done.
Fitting stuck on with blue tac.
Trial fitting, does not sit right because its held on by blue tac
More bad news tho, i ordered a new res (cause one leaked) and the new one leaked.. lol, so in the last photos you can see the first leaky one in place, and the 4th one is a scratched one i have had since the start of the build. Also you will notice the filter paper on the floor is all ripped, im changing the way this works slightly... But I'm waiting for the replacement res before i can do anything
Skorch
I have been meaning to update this thread for ages as i have spent a great deal of time working on it.
So lets begin...
This is where we left off.
Since them i have rebuild and re-wired all of it and got it "finnished" bar the panels. Then it leaked. So i had to rebuild dit again, very annoying. Ill stop talking now and show pics
The pumps draw to much power from the distro blocks and smoked them, so i solderd some wire on.
I then went to bend the alli and it went a bit wrong, so i flattended it and went to bend it again and...
Oppss... Not to worry i have a new idea that will actuly be even better than before so keep watching.
Out with the broken, in with the new.
Some Build Pics
Now i just have to sort the side panels and get them powderd and a few finishing touches.
Skorch
So lets begin...
This is where we left off.
Since them i have rebuild and re-wired all of it and got it "finnished" bar the panels. Then it leaked. So i had to rebuild dit again, very annoying. Ill stop talking now and show pics
The pumps draw to much power from the distro blocks and smoked them, so i solderd some wire on.
I then went to bend the alli and it went a bit wrong, so i flattended it and went to bend it again and...
Oppss... Not to worry i have a new idea that will actuly be even better than before so keep watching.
Out with the broken, in with the new.
Some Build Pics
Now i just have to sort the side panels and get them powderd and a few finishing touches.
Skorch
dugdiamond
New member
awesome work
daantjuh44
New member
Amazing job dude !
Karlos_the_n00b
New member
That is big time impressive!
