.:Filtration:. - Finished - New Video
- Thread starter Skorchio
- Start date
Ducky Spud
New member
I was wondering what would be happening to the tubing after it went out through the mobo tray/fake back. Cant wait to see this finished, some genuinly original and intresting designs going on 
Hmmmmmm Im not to keen on the new layout... :/
siravarice
New member
So you couldnt get 90 degree connectors and extensions? That would look a lot better, and save space.
Hmm, i cant get 90's as i want to use the same fittings on every one. I much prefer the radiator layout, i would like to have kept the pumps the as they where but that kink kinda kills it. I made it look better than it was in the pics. Looking at it here this looks allot better. Ill keep and open mind tho! I have a huge problem that i was deading at the moment to overcome 
Quite a big update.
I got my new white rad mounts, only problem was they didn’t fit under the fittings coming through the floor. I knew it was not going to fit and thought I could tweak it so, but I didn’t realise it would be 11mm out :O I’m going to make a custom rad mount (a decent one, not like the one I made first of all ha-ha that was crap!!) for the 360 rad. Next up was re drilling and tapping the holes for my 240 as it was purchased second hand and was tapped to M5. Then I put everything together and saw just how much work I was going to have to go to get all this tubed up :O. I may have to drop the 240 on to a custom rad mount as well so I can lower it to give me more space. Going to order my new Alli now for the back plate as I just can’t see any better solution for the kinking hoses that to mount them as previous post
Enough talking here are the picas.
I was going to chop the mount down by this much, but then realised it would be better to make a new one.
I got my new white rad mounts, only problem was they didn’t fit under the fittings coming through the floor. I knew it was not going to fit and thought I could tweak it so, but I didn’t realise it would be 11mm out :O I’m going to make a custom rad mount (a decent one, not like the one I made first of all ha-ha that was crap!!) for the 360 rad. Next up was re drilling and tapping the holes for my 240 as it was purchased second hand and was tapped to M5. Then I put everything together and saw just how much work I was going to have to go to get all this tubed up :O. I may have to drop the 240 on to a custom rad mount as well so I can lower it to give me more space. Going to order my new Alli now for the back plate as I just can’t see any better solution for the kinking hoses that to mount them as previous post
Enough talking here are the picas.
I was going to chop the mount down by this much, but then realised it would be better to make a new one.
Ducky Spud
New member
Im with Tom sorry, think the tubing going into the res's looked better when they were all the same height on the back.
Other than that looking good still. I bet your dreading doing the tubing in the bottom section haha, its gonna be tight!
Other than that looking good still. I bet your dreading doing the tubing in the bottom section haha, its gonna be tight!
siravarice
New member
Mod of the year? I think so!
Does look really nice Skorch, bit if a bugger about the fan mount though :/
Does look really nice Skorch, bit if a bugger about the fan mount though :/
I know ducky, you have to see it IRL to see how bad the kink was, this should also bring some new levels to the eye. Yeh really not looking forward to doing the tubing, its all i have been thinking about all day. Think i got it sussed in my head tho just need my fittings to be sent back to me (the right size) then i got to re-cut all the windows and get some laser cutting done!
SA, thanks mate very nice of yo to say so. Yeh bugger about the rad mount but as im flushing off and remaking the botton window it will all line up, may talk to Silverstone about sending me a blank side panel so i can just get that laserd!
SA, thanks mate very nice of yo to say so. Yeh bugger about the rad mount but as im flushing off and remaking the botton window it will all line up, may talk to Silverstone about sending me a blank side panel so i can just get that laserd!
First,, I'm a big fan of the TJ07 case, I've been looking at all kinds of TJ07 mods,, Filtration is going places for you,, & your doing an Awesome job so far on the quality of modding & the Design, Others may have opinions,, but I say keep your vision because it's your creation.
Tonight i finished off the 2 new sides for the drive bay box. As you can see 2 hav been extended, this will give it a much cleaner look.
Before:
After
Also when air is sucked throught the bottom (once laser cut) the air will go through this hole and force airflow over the back of the mobo.
More soon
Skorch
Before:
After
Also when air is sucked throught the bottom (once laser cut) the air will go through this hole and force airflow over the back of the mobo.
More soon
Skorch
walkingasd
New member
rolf paint skillz! 
you could go with a set of curves (repeated a couple of times)
you could go with a set of curves (repeated a couple of times)
siravarice
New member
Yeah +1 on the curves. I think it would go with the watery theme. Curves making up a circle though
Lol no not drunk 
Iv allways wanted a new camera as i used to be really in to photography till my camera broke and i never replaced it!!
Final got a new one so i can give you nice shots of the rig from now on...
Also this is probs what im going to go with for the rad design, and maybe a larger vertion for the side pannel.. Not sure yet.
More soon
Skorch
Iv allways wanted a new camera as i used to be really in to photography till my camera broke and i never replaced it!!
Final got a new one so i can give you nice shots of the rig from now on...
Also this is probs what im going to go with for the rad design, and maybe a larger vertion for the side pannel.. Not sure yet.
More soon
Skorch
thestepster
New member
wowwwww thats a really nice camera! not to mention ur rig is lookin sweet 2
