Chiller's Hybrid Level 10

[croimans]

pics of what i did today :

from this :

i made these, and a little bit more, only waiting for a new shipment of red connectors :

 

[SiN]

pics of what i did today :

from this :

i made these, and a little bit more, only waiting for a new shipment of red connectors :

I wish I had the patience for sleeving, the stock OCZ sleeving is pretty junky.

 

[croimans]

today received package with connectors :

i made this, and have to make more of them for the other cpu and vga power on mobo :

and for the 90° corner of mobo has his place, tru the wall behind the Boreas Chiller, and also the tubing for the little isolated reservoir :

 

[SiN]

I like those right-angle pieces, very nice!

 

[croimans]

thanks, but a lot of work for making them

 

[croimans]

The other cpu his power cable is also done, and the PciE cable also :

Total overview of the powercables on the motherboard, the green circle is where the cables leave the case to the other side for connection to the powersupply :

 

[SiN]

Will the cables going over the chokes heat them up more? And I hope you will be utilizing some zip-ties.

 

[croimans]

yes red uv zipties will be used, and where the cables run, the chokes doesn't go hot, the area's where they get hot is already cooled by the block.

Where the cable runs is also the Coolit Freezone Elite cooler sucking the air to outside the case,

so if it even gets a little hot, it will be cooled

 

[croimans]

new parts in :

Evga SR-2 1200w (peakload 1700w) psu

Due to U.S. regulation, power draw over a typical household 110-volt AC line limits the PSU-1300ATX-12N to 1300W. However, the unit is fully capable of a continuous 1700 watts when powered from a 220V AC circuit. Users are responsible for supplying adequate AC power for the PSU-1300ATX-12N.

PciE connector for GPU's with a 2200UF (MicroFarad) condensator and ferrit-cores :

Cpu ATX power connectors, also with 2200UF (microFarad) Condensator and ferrit-cores :

and te best part of the power supply is on the back of it lol :

Also LGA1156 socket isolation and new inox Backplates for my SR-2 :

also i got two red displays in for on my controller.

To swat the green light lcd out for a red symbol / black background display :

 

[AMDFTW]

why o why ^^^^^^^^^^^^^^^^

 

[croimans]

why o why ^^^^^^^^^^^^^^^^

Why ?

what do you mean with why o why ?

 

[AMDFTW]

why did you buy this psu dude

it should of been enermax

 

[Ghosthud1]

why o why ^^^^^^^^^^^^^^^^

because he can?

And it also keeps to the project theme.

 

[croimans]

it's the power supply special for this mobo???

and the adjustable 12v rails are a very nice option

 

[AMDFTW]

because he can?

And it also keeps to the project theme.

lol

i just think the enermax revolution would of looked nice and performed alot better,not this rebrand

 

[croimans]

take a HB624 controller with ALMEGA88V chip :

put some cables and a pot meter on it :

with the pot meter 10K i can adkust the screen light :

To see real time the 12v rail of the SR-2 powersupply, and monitore the power drawn of the three coolit coolers :

cpu disable jumpers soldered for make the connector for it in front of the case :

need to cut new Socket isolation because SR-2 has no big condensators next to the sockets, so i can use some more isolation : :

putted also three temp sensors under the full cover blok, to measure the CPU PWM 1 en 2 and the NB temp

with a Koolanc TMS-200 controller :

total overview of the mobo in current state:

 

[croimans]

today little testing en measurement, the boreas chiller and the freezone will be hanged on the power use controller.

but a lot of cables here that needs to be in the case fitted.

 

[croimans]

Alu plaat of 1.5mm is in, tomorrow making the adjustment of the mobo cover :

 

[Tankou]

Damn, that's awesome.

 

[killablade]

w00t that looks hot ^^