Gurt11
New member
Hello fellow OC3D'ers!
The build has long been build, but I never got round to posting it here in the rig gallery. Today is the day though!
Hardware:
Corsair 600T SE
MSI Z77 MPower
i5 2500K (@4,7ghz)
ASUS GTX 660Ti
Corsair Vengeance LP 8gb 1600mhz
Samsung 840 256gb SSD
ASUS Xonar DX soundcard
Corsair AX860
Scythe Kaze Master Pro 5,25" fancontroller
Corsair AF, SP's and Enermax Cluster fans
Nzxt 2m white leds
Watercooling:
XSPC Raystorm CPU block
EK GTX670 nickel-plexi waterblock
Phobya G-Changer 240mm radiator
Alphacool 360mm full copper ST radiator
Alphacool 250mm reservoir
Alphacool D5 pump + Alphacool D5 pump top
Monsoon + Bitspower fittings (7/16)
XPSC White Tubing
(other bits and bobs, see buildlog)
Everything you see, I did myself. MDPC-X Sleeve for the cables and for the rest I used a dremel, jiggsaw, hamer, screwdriver, files, rulers, sunglasses, ... Everything happened on the kitchen or garden table. (Build log: sleeving ends and modding starts at page 8.)
Big thanks to Tom for making his 600T watercooling and modding guide video. I thought of these things before, but you saying it could be done was one of the things that made me actually do it.
Big thanks to MetallicAcid (@OCN) too. Thanks to him I knew how to light up the white panel from the PSU cover.
And of course thank you to all the people who followed and commented to the log!
This was the old watercool gpu block, it got changed two weeks later to a full cover block.
The lighting ís all white by the way. The pictures make it look blue
Where it stands now:
My own magic cuppboard of dreams, hehe ;p
That's it folks!
(( Next on the planning is a custom designed Parvum build
(still in drawing-stages) ))
The build has long been build, but I never got round to posting it here in the rig gallery. Today is the day though!
Hardware:
Corsair 600T SE
MSI Z77 MPower
i5 2500K (@4,7ghz)
ASUS GTX 660Ti
Corsair Vengeance LP 8gb 1600mhz
Samsung 840 256gb SSD
ASUS Xonar DX soundcard
Corsair AX860
Scythe Kaze Master Pro 5,25" fancontroller
Corsair AF, SP's and Enermax Cluster fans
Nzxt 2m white leds
Watercooling:
XSPC Raystorm CPU block
EK GTX670 nickel-plexi waterblock
Phobya G-Changer 240mm radiator
Alphacool 360mm full copper ST radiator
Alphacool 250mm reservoir
Alphacool D5 pump + Alphacool D5 pump top
Monsoon + Bitspower fittings (7/16)
XPSC White Tubing
(other bits and bobs, see buildlog)
Everything you see, I did myself. MDPC-X Sleeve for the cables and for the rest I used a dremel, jiggsaw, hamer, screwdriver, files, rulers, sunglasses, ... Everything happened on the kitchen or garden table. (Build log: sleeving ends and modding starts at page 8.)
Big thanks to Tom for making his 600T watercooling and modding guide video. I thought of these things before, but you saying it could be done was one of the things that made me actually do it.
Big thanks to MetallicAcid (@OCN) too. Thanks to him I knew how to light up the white panel from the PSU cover.
And of course thank you to all the people who followed and commented to the log!
This was the old watercool gpu block, it got changed two weeks later to a full cover block.
The lighting ís all white by the way. The pictures make it look blue
Where it stands now:
My own magic cuppboard of dreams, hehe ;p
That's it folks!
(( Next on the planning is a custom designed Parvum build
(still in drawing-stages) ))
Last edited:
I'm proud of it! (But it's amazing how fast you want something completely different 
