Benchteam Bragging thread

[tinytomlogan]

Thanks guys. I'm no longer that much into overclocking. I prefer not to torture my system too much. It took way too long to build it and it went to much energy into it. And to top it of, I have a pretty bad CPU...



That voltage is correct - unfortunately...

Here is probably my best contribution:

Old Folding Farm. Too bad TTL didn't set to all the threads in his Cinebench 11.5 bench-run. He reviewed the 12 core Intel Xeons a while ago, but he didn't set CineBench to utilize all cores. It automatically sets itself to 32 threads max. I wonder if the Xeons would have come close...

Ive got a pair of 18 core beauties coming

 

[tinytomlogan]

I should have the 18 core beauties arriving soon

 

[MadShadow]

I should have the 18 core beauties arriving soon

Awesome

 

[kilobravo]

Lucky draw

Looks as if i have won me a nice hardware bundle.
8gb 2800mhz hyperx
Z97 soc force
10g gelid extreme
240gb hyperx 3k ssd
CM nepton 140xl
CM v750s
http://hwbot.org/competition/hyperxhot14emea

 

[mihapiha]

I should have the 18 core beauties arriving soon

This time set up the CineBench run right

 

[Tripp]

Looks as if i have won me a nice hardware bundle.
8gb 2800mhz hyperx
Z97 soc force
10g gelid extreme
240gb hyperx 3k ssd
CM nepton 140xl
CM v750s
http://hwbot.org/competition/hyperxhot14emea

Congrats buddy you won a nice prize there

 

[kilobravo]

Got Lucky with a 5960X.Doing 4.8ghz-1.35v at 3000mhz 14-14-14-25-2T ram.Gotta love R5E.

 

[kilobravo]

Had my 1st experience with ln2,and whilst good for DICE,my subzero pot cant handle a 5960x running 350w+ without careful monitoring temps.My octocore couldnt handle below -95c where it would hardlock blackscreening and was difficult administering ln2.Soo the gap from -192c to -95c was hard to handle.But 5730mhz is quite honorable,beating some off the heavy benchers.

Hwbot prime at 5730mhz with a 5960x isnt that bad.

http://hwbot.org/submission/2911636_kilobravo_hwbot_prime_core_i7_5960x_9401.84_pps

 

[Rasmus66]

Had my 1st experience with ln2,and whilst good for DICE,my subzero pot cant handle a 5960x running 350w+ without careful monitoring temps.My octocore couldnt handle below -95c where it would hardlock blackscreening and was difficult administering ln2.Soo the gap from -192c to -95c was hard to handle.But 5730mhz is quite honorable,beating some off the heavy benchers.

Hwbot prime at 5730mhz with a 5960x isnt that bad.

http://hwbot.org/submission/2911636_kilobravo_hwbot_prime_core_i7_5960x_9401.84_pps

You need a propane blowtorch m8.

It has to be similar to the one on the picture.

The trick is to cool the pot down to about -80 c then hit it with the torch for about 30 sec then pour ln2 again.

Like Splave does in this video.

https://www.youtube.com/watch?v=N0y2mTuK9IA

It will go in to a sort of pull down mode where it reacts very fast to just a tiny bit of ln2 making it easier to control the temperature

 

[kilobravo]

It will go in to a sort of pull down mode where it reacts very fast to just a tiny bit of ln2 making it easier to control the temperature

Will have one for next session.Thanks for the advice mate.^_^