BackDraft Evo (a Nanoxia DS1 Build)
- Thread starter 23RO_UK
- Start date
Mgutierrez33
New member
Brings a tear to my eye... lovely looking build so far!
... dat Monsta rad clearance x-)
... dat Monsta rad clearance x-)
23RO_UK
New member
:lol:
Looking good, mate!
Cheers guys
Already done so and believe it or not on this occasion not even a trace of gunk
23RO_UK
New member
Meet the new arrivals
1 x Patriot Viper 3 Series Black MambaDDR3 8GB (2 x 4Gb) 2133MHz Dual Channel Kit (PV38G213C1K)
(Gotta hate it when your camera picks up dust invisible to the human eye lol)
"Sleek, stylish and quite aggressive"
Perfect!!!
And certainly in keeping with the character of the build
__________________
1 x Patriot Viper 3 Series Black MambaDDR3 8GB (2 x 4Gb) 2133MHz Dual Channel Kit (PV38G213C1K)
(Gotta hate it when your camera picks up dust invisible to the human eye lol)
"Sleek, stylish and quite aggressive"
Perfect!!!
And certainly in keeping with the character of the build
__________________
Last edited:
23RO_UK
New member
7mm makes all the difference...
(size does matter lol or in this instance a reduction works better still lmao)
The old and the new
In with the new
Perfect!!!
The additional 7mm I've gained would allow me to front and back the ST30 should I choose to do so or even install an ST45
(size does matter lol or in this instance a reduction works better still lmao)
The old and the new
In with the new
Perfect!!!
The additional 7mm I've gained would allow me to front and back the ST30 should I choose to do so or even install an ST45
Last edited:
23RO_UK
New member
Cheers mate
The Vipers run at 11 11 11 27 2T on 1.5V @ 2133MHz at stock Tripp
Though I also know they can run at 11 12 11 30 @ 2400MHz
So plenty of BCLK tweaking to be had
Tripp
too many shrooms
Cheers mate
The Vipers run at 11 11 11 27 2T on 1.5V @ 2133MHz at stock Tripp
Though I also know they can run at 11 12 11 30 @ 2400MHz
So plenty of BCLK tweaking to be had
that's some heafty ram haha
23RO_UK
New member
that's some heafty ram haha
I was planning on buying that same RAM for my new build. It looks sexy as ef
Lovely fittings btw!
Aye the RAM isn't bad
Looking good fella, I had been wondering what this build looked like since you've been talking about it long enough
Gotta love that rad though, look up overkill in the dictionary and it's just a picture of that.
Cheers mate, it's getting there...
Overkill meh lol
Overkill is never overkill
23RO_UK
New member
Right we have some more movement...
After much brainstorming I've decided to go with a pump/res combo in the form of the XSPC X2O 750 V4.
The rear provides an in at the lower left, out at the upper left, and a spare port at the lower right. The spare port can be used to bring together a parallel loop or it could even be used to bypass the pump and use the reservoir as a stand alone reservoir. This provides great versatility if perhaps you decide to buy a larger pump at a later date or it could probably be used as a fill port, etc. The casting quality looks very good and you can use any G1/4 threaded barb or compression fitting here.
Now to install it...
My aim is to go for a very minimalistic and clean looking loop; as point to point as humanly possible.
A revision of the fittings on the CPU block.
The pump feeds the roof mounted ST30 which then in turn feeds the Monsta.
Very happy with that thus far
After much brainstorming I've decided to go with a pump/res combo in the form of the XSPC X2O 750 V4.
The rear provides an in at the lower left, out at the upper left, and a spare port at the lower right. The spare port can be used to bring together a parallel loop or it could even be used to bypass the pump and use the reservoir as a stand alone reservoir. This provides great versatility if perhaps you decide to buy a larger pump at a later date or it could probably be used as a fill port, etc. The casting quality looks very good and you can use any G1/4 threaded barb or compression fitting here.
Now to install it...
My aim is to go for a very minimalistic and clean looking loop; as point to point as humanly possible.
A revision of the fittings on the CPU block.
The pump feeds the roof mounted ST30 which then in turn feeds the Monsta.
Very happy with that thus far
Last edited:
AverageNinja
Average Penis Too
^^ and so it begins.
Good luck and may the spirits of the watercooling gods/godesses be with you!
Good luck and may the spirits of the watercooling gods/godesses be with you!
23RO_UK
New member
Lovely and neat dude.
Thank you both
Agreed the Viper memory is belting kit
You can't go wrong with rock solid and stable memory running 11-11-11-27 1T @ 2133MHz at a mere 1.5V
23RO_UK
New member
Back in post #27 I commented that that was the first phase of the GPU transformation...
Well now it's time to reveal all (well not quite all)
Nate aka Editor22 of E22 has been working on some pieces for me, this wee bundle arrived yesterday -
I'll let the pictures do the talking but lets just say this is when thoughts and concepts become a reality...
Well now it's time to reveal all (well not quite all)
Nate aka Editor22 of E22 has been working on some pieces for me, this wee bundle arrived yesterday -
I'll let the pictures do the talking but lets just say this is when thoughts and concepts become a reality...
Last edited:
