900D Water Cooled GTX 780 TI Classified SLI

GhostDog99

GhostDog99

New member
Hey mates here is a update to my rig
for some resign I could not up date my other thread
so here is a new one (:

sorry for the bad pictures my camera is dead
so it is phone pictures and bad lighting
but will update soon with better picture when I get a new camera :)


CPU: i7 3930k @ 5GHz 1.45v
Mobo: Asus Rampage IV Extreme
GPU: EVGA GTX 780 TI Classified KPE SLI @ 1500 / 2025
Ram: Corsair Dominator GT 16GB 2133MHz @ 2400MHz
SSD: OCZ Vertex 4 256GB
SSD: OCZ Vertex 3 240GB
HDD: WD 2T
PSU: EVGA G2 1300w
PSU: Corsair AX860w
Case: Corsair 900D

New pictures for you guys


























Fire Strike Single Card
http://www.3dmark.com/fs/1643876



Fire Strike Extreme Single Card
http://www.3dmark.com/fs/1636376



Fire Strike SLI
http://www.3dmark.com/fs/1614883



Fire Strike Extreme SLI
http://www.3dmark.com/fs/1614863

 
Last edited:
When you update your post in the Rig Gallery, it needs moderator approval each time, so did it seem to disappear after you had edited the previous one?

This looks pretty nice I think, but what's with the two power supplies?
 
not bad at all, nice straight lines, very tidy

is it just the picture or are your hard drive cages bent?
 
Remmy said:
When you update your post in the Rig Gallery, it needs moderator approval each time, so did it seem to disappear after you had edited the previous one?

This looks pretty nice I think, but what's with the two power supplies?
Click to expand...
I do a lot of benching so I need the power for the cards
when I bench im running the cards @ 1480mhz with 1.5v and the CPU @ 5.4Ghz @ 1.6v
and with only one power supply the PC will shutdown so I need 2

and no I didn't even have the option to edit the post

Cru3L139 said:
not bad at all, nice straight lines, very tidy

is it just the picture or are your hard drive cages bent?
Click to expand...

it is just the picture

and thanks guys :beerchug:
 
Last edited:
It looks nice. If I had one critique at all it would be that the top radiator is a bit too thick and the fans on that top radiator look very bland compared to the rest of the build.

Of course they don't ruin the build it looks gorgeous.

I'm about to embark on a build very similar to this, 900D, Dual GTX 780s with EK blocks on everything. Even Blood Red coolant :P - I hope mine ends up as nice as yours :)
 
Very tidy rig, Ive never been a fan of parallel GPU tubing or watercooling your ram but it does look the part

Ill get this up on facebook :)
 
that's awesome rig bud and like the colour scheme what temps are you getting with the setup and what games you play and how many monitors be nice to no but its very very nice
 
tinytomlogan said:
Very tidy rig, Ive never been a fan of parallel GPU tubing or watercooling your ram but it does look the part

Ill get this up on facebook :)
Click to expand...

Thanks mate means a lot coming from you :beerchug:
and a bout the parallel GPU tubing I have had
the GPUs both ways and I find it does not make a deference
so I just go with what I think looks better
same for the ram water-cooling it does not really help I just like the look lol :cool:

Warchild said:
Lower the ISO of your camera and it should help with the LED overbrightness.
Click to expand...

ya I will try this when I get my new camera and I will update the pictures

paullongy326 said:
that's awesome rig bud and like the colour scheme what temps are you getting with the setup and what games you play and how many monitors be nice to no but its very very nice
Click to expand...

thanks (:
my Temps are like this room temp is 27c-30c
CPU: 24/7 @ 5GHz 1.45v idle 30c - 32c 100% load 64c - 67c
CPU: Benching @ 5.4GHz 1.6v idle 35c - 40c 100% load 80c - 85c

GPUs: 24/7 @ 1287/ 1950 1.212v idle 28c - 31c load 39c - 40c
GPUs: Benching @ 1467 / 2150 1.5v idle 30c - 33c load 46c - 50c

I have one monitor a Samsung S27B970D 2560x1440

I play Batman Arkham origins , Crysis 3 , Assassin's Creed IV , Splinter Cell black list , Tomb Raider , bioshock infinite , Far Cry 3 and metro last light
 
Last edited:
Love your rig, mate. Not quite my colour scheme, but extremely well done. :beerchug:

Could you tell me something about your tubing? Am I right in suspecting it is all rigid acryllic? Did you use Bitspower Crystal Link? Where did you get the longer pices? E22 maybe?
Looking forward to answers, as I am about to embark on my owm 900D/modding journey ;)

Cheers,
~nik
 
AlexBournemouth2013 said:
The only thing I'd suggest is cutting the cable tie on the GPU cables.
Click to expand...

it is already cut mate it was there just so the cables get molded in to that position if you look @ the latter pictures the cable tie is not there anymore
vladnik said:
Love your rig, mate. Not quite my colour scheme, but extremely well done. :beerchug:

Could you tell me something about your tubing? Am I right in suspecting it is all rigid acryllic? Did you use Bitspower Crystal Link? Where did you get the longer pices? E22 maybe?
Looking forward to answers, as I am about to embark on my owm 900D/modding journey ;)

Cheers,
~nik
Click to expand...

yes mate you are right on it is all acrylic tube im using Bitspower Crystal Link and E22
the Res / Pump combo is Bitspower too
 
GhostDog99 said:
I do a lot of benching so I need the power for the cards
when I bench im running the cards @ 1480mhz with 1.5v and the CPU @ 5.4Ghz @ 1.6v
and with only one power supply the PC will shutdown so I need 2

and no I didn't even have the option to edit the post



it is just the picture

and thanks guys :beerchug:
Click to expand...

Nice. Are you using a custom bios?
 
You must log in or register to reply here.

Similar threads

WYP
3DMARK Fire Strike and Time Spy Benchmark Thread
2 3 4
Replies
77
Views
43K
Tripp
Tripp
R
980ti SLI problem
2
Replies
23
Views
5K
remember300
R
shambles1980
My KAf2 Gtx 780 Oc tests
Replies
1
Views
2K
shambles1980
shambles1980
8
nice up date on my rig
Replies
8
Views
6K
theDTP
T
J
The Storm - X99 Enthusiast-class Gaming and Content Creation Desktop Computer
Replies
0
Views
2K
JurunceNK
J
Back
Top