Hi
im on new project,
Snef's "Sand of God"
very hard to find good name lollll
this rig will be my main rig, replacement of extremmmme red demon
start with parts list
Hardware
Cpu: Intel I7 4770k:
Motherboard: Asus Gryphon with Armor kit
Mem: 16 Gb (4x4)Corsair Dominator GT 2133:
GPU: 2 x gtx780 Hall Of Fame
Case: Caselabs S5 with Pedestal white
PSU: Silverstone ST1500 with pp05 short cable
SSD: OS: 4 x OCZ Vertex 4 256GB (all in Raid) and 1 x Samsung EVO 1Tb
Cooling
Fan: 9 x Corsair sp120 HP and 4 x Corsair AF120
Fan Controller: Aquaero 6
CPU Block: EK Supremacy (CSQ) Plexi copper(polish)
Ram Block: EK Ram CSQ plexi Copper (polish)
GPU: 2 x EK GTX780 HOF white
Rad: 2 x XSPC RX360 and 1 x ex360
Reservoir: 2 x EK res X3 with white top and bottom
Pump: 2 x D5 Vario:
Pump top: Bitspower dual D5 acrylic top
Tubing: E22 10/12mm hard tubing
Fittings: Bitspower compression fitting, angle and spacer all white,
Coolant: Mayhem Yellow with Orange dye
Thermal paste: MX-4 and Gelid (EK)
Mod
Sleeving: Darkside White and Yellow sand 2mm, 4mm and sata data Sleeving
Connector: all white connector: [
Paint: white primer, paint and plasti-dip and yellow sand paint
Full custom White and yellow sand Sticker
white and gold screw, and thumb screw:
And more, inspiration
yes, I have sponsors for this build
my first build with sponsors :fix:
I want to say a huge Thanks to Dazzzz for this
My Sponsors
first the case
just finished, I really like it, I think its my best Caselabs case,
Yellow sand , part of sleeving and coolant will be yellow sand
I painted some fan and install it in my S5
some pics of Corsair Fan
all fan screw will be Brass or white
need to sleeve all fan cable
still a lot of job to do
paint and sleeving are exact same color and my coolant is very very closed
sleeving time
I burned all my fingers but I like the results
still a lot of cable to do
Sata cable, cheating on this one, bought already sleeved but put white heat shrink
24 pins, I like the white, put white heat shrink on all white cable, like that white is pure white
Molex, double wire is not easy
CPU 8 pins
paint: armor, Aquaero faceplate, some fittings, fan ect...
and bad news, need to redo my 24 pins and 8 pins, need to do a custom cable,
first, the regular shot
from the other side, I put cable like this to train it, but I think I need to do a custom one
a shot from the side, I really like this case,
some of painted armor
the finish of this paint (Rust-Oleum) is perfect, really like white plastic
others pics
all connector are black but I will change all to white connector, received connectors yesterday
next step,
custom PCI-E cable and sleeving
order a GTX780 HOF (next week)
and a lot more
little bit of work on SSD today
redo the heat shrink on sata cable,
and did a custom sticker for Corsair dominator
another little update
RAM
yep
did some sticker for ram
but need your help, need to find an idea for the power supply, or I will let it white?
some pics of the ram
that's it for now
next update really soon
im on new project,
Snef's "Sand of God"
very hard to find good name lollll
this rig will be my main rig, replacement of extremmmme red demon
start with parts list
Hardware
Cpu: Intel I7 4770k:
Motherboard: Asus Gryphon with Armor kit
Mem: 16 Gb (4x4)Corsair Dominator GT 2133:
GPU: 2 x gtx780 Hall Of Fame
Case: Caselabs S5 with Pedestal white
PSU: Silverstone ST1500 with pp05 short cable
SSD: OS: 4 x OCZ Vertex 4 256GB (all in Raid) and 1 x Samsung EVO 1Tb
Cooling
Fan: 9 x Corsair sp120 HP and 4 x Corsair AF120
Fan Controller: Aquaero 6
CPU Block: EK Supremacy (CSQ) Plexi copper(polish)
Ram Block: EK Ram CSQ plexi Copper (polish)
GPU: 2 x EK GTX780 HOF white
Rad: 2 x XSPC RX360 and 1 x ex360
Reservoir: 2 x EK res X3 with white top and bottom
Pump: 2 x D5 Vario:
Pump top: Bitspower dual D5 acrylic top
Tubing: E22 10/12mm hard tubing
Fittings: Bitspower compression fitting, angle and spacer all white,
Coolant: Mayhem Yellow with Orange dye
Thermal paste: MX-4 and Gelid (EK)
Mod
Sleeving: Darkside White and Yellow sand 2mm, 4mm and sata data Sleeving
Connector: all white connector: [
Paint: white primer, paint and plasti-dip and yellow sand paint
Full custom White and yellow sand Sticker
white and gold screw, and thumb screw:
And more, inspiration
yes, I have sponsors for this build
my first build with sponsors :fix:
I want to say a huge Thanks to Dazzzz for this
My Sponsors
first the case
just finished, I really like it, I think its my best Caselabs case,
Yellow sand , part of sleeving and coolant will be yellow sand
I painted some fan and install it in my S5
some pics of Corsair Fan
all fan screw will be Brass or white
need to sleeve all fan cable
still a lot of job to do
paint and sleeving are exact same color and my coolant is very very closed
sleeving time
I burned all my fingers but I like the results
still a lot of cable to do
Sata cable, cheating on this one, bought already sleeved but put white heat shrink
24 pins, I like the white, put white heat shrink on all white cable, like that white is pure white
Molex, double wire is not easy
CPU 8 pins
paint: armor, Aquaero faceplate, some fittings, fan ect...
and bad news, need to redo my 24 pins and 8 pins, need to do a custom cable,
first, the regular shot
from the other side, I put cable like this to train it, but I think I need to do a custom one
a shot from the side, I really like this case,
some of painted armor
the finish of this paint (Rust-Oleum) is perfect, really like white plastic
others pics
all connector are black but I will change all to white connector, received connectors yesterday
next step,
custom PCI-E cable and sleeving
order a GTX780 HOF (next week)
and a lot more
little bit of work on SSD today
redo the heat shrink on sata cable,
and did a custom sticker for Corsair dominator
another little update
RAM
yep
did some sticker for ram
but need your help, need to find an idea for the power supply, or I will let it white?
some pics of the ram
that's it for now
next update really soon
Last edited:
