will it fit, buying new case

[Mgut91]

Going to buy the carbide air 540 case, not sure where i should put this, but for the question is
Will the case fit a 240 rad(45mm x 120mm x 276mm) in the top + 360(60mm x 120mm x 410mm) in front? with one set of fans

 

[Dark NighT]

Judging from this picture it looks like it will fit, Just!

Keep in mind though, with this sort of setup getting the air out of that 360 is going to be a bit annoying since the fittings are on the bottom, which is probably the only way to mount it if you have a second rad.

 

[Mgut91]

i could always turn it up-side down if that will get the air out.

 

[Remmy]

It ain't toooo bad. My front rad is upside down, and to get the air out I just tip the case onto its front (on a towel to cushion it) and tip it back and forth from there until the air is out. Remember to bleed the front one first too, because if you do it the other way around you just end up filling the top rad with air all over again.