Waterblock for EVGA 660ti 3gb

[TheySt0leMyName]

Hi guys,
Does anyone know of a full cover waterblock for an EVGA 660ti ftw+ 3gb
I've had a look on cooling configurator but it only says it has a visual check, How reliable would that be for fitting?

 

[B NEGATIVE]

Its good,they have visually inspected the card. Does it have the ref logo in the left side of the window?

 

[airdeano]

FTW Cards are Different

ahhh FTW is a tricky dog.. it's not like the SC or standard where the fan is
divorced from the actual PCB. i believe its made along the 680 PCB. as where
the SC and standard use the 670 non-FTW PCB. you'll have to be careful
about the 680 GPU mount. some use a smaller bolt pattern than 680 (more
on the 660ti spread).

if you can find some technical data and verify your GPU bolt pattern.
there is a 58mm (large bolt pattern) mount
there is a 47mm (small bolt pattern) mount
standard and SC can use either, but a full block is only 161mm wide
the ftw and 680 use a much wider block for a "full card" block.

 

[B NEGATIVE]

660ti you linked

My 670 FTW

As you can see for yourself,they are 680 cards,there are small changes but nothing to stop the block fitting,they have removed stuff from the VRM section rather than moving/adding stuff.

680 blocks will fit as confirmed by EK.

 

[TheySt0leMyName]

Thanks guys. Am I right in thinking that all 680 blocks should fit this card?
Here's the cooling configurator list.

 

[B NEGATIVE]

Yes.
Its ref 680 board.