Vegard's 800D Project

VegardBS said:
...but why not show off my OCZ Agility 3 120GB SSD?
Click to expand...

Because it's made by OCZ? :lol: If you don't know already, OCZ products are generally frowned upon here. I have no experience with the company so I don't know for myself, I'm just saying what other people (including Tom, multiple times) have said. :)
 
pcjunkie429 said:
Because it's made by OCZ? :lol: If you don't know already, OCZ products are generally frowned upon here. I have no experience with the company so I don't know for myself, I'm just saying what other people (including Tom, multiple times) have said. :)
Click to expand...
The Agility 3 Isn't the best SSD, but it's decent. I may go for two of them for Raid 0 one time. If I go for Raid. If not I'm probably buying the Samsung 840pro.
 
VegardBS said:
The Agility 3 Isn't the best SSD, but it's decent. I may go for two of them for Raid 0 one time. If I go for Raid. If not I'm probably buying the Samsung 840pro.
Click to expand...

I have a Agility 3, and on the beginning was all good, but now I'm sometimes getting BSOD, and from time to time it take's 1 minute to boot the system up, when normally it less than 20 seconds. So I will say go for 840pro, if you have a choice:)
 
| raVen | said:
I have a Agility 3, and on the beginning was all good, but now I'm sometimes getting BSOD, and from time to time it take's 1 minute to boot the system up, when normally it less than 20 seconds. So I will say go for 840pro, if you have a choice:)
Click to expand...
Yeah, that's probably what i'll do, I heard you loose TRIM if you raid ? My Agility 3 haven't had too many problems, but it's just quite slow for me. Tried the latest firmware and it made the boot time a little bit quicker.
 
My one is just dying I think..., well I have everything on backup, so when it decide to go to SSD heaven I will have to order new one:)
 
How many GBs is it on the next you're you going to buy? I really hate only having 120GB, can't fit BF3 on there now... I'm also sick of my Mechanical HDD, It is making so much noice and vibrations. When SSD's are cheaper i'll probably go with 500GB ones, if not 1TB if it's out at the time I can afford something like that.
 
VegardBS said:
How many GBs is it on the next you're you going to buy? I really hate only having 120GB, can't fit BF3 on there now... I'm also sick of my Mechanical HDD, It is making so much noice and vibrations. When SSD's are cheaper i'll probably go with 500GB ones, if not 1TB if it's out at the time I can afford something like that.
Click to expand...

1TB SSDs are out now but they are about 1 or 2 grand (USD).
 
I don't know yet, but 250GB minimum. What HDD you have that it makes a lot of noise? My is nice and quiet, and I does't hear any vibration, but this is thanks to mounting for hard drives.
 
pcjunkie429 said:
1TB SSDs are out now but they are about 1 or 2 grand (USD).
Click to expand...
Forgot to say when they're available in Norway, but after checking some more Crucial have one. Holy, it's expensive.

| raVen | said:
I don't know yet, but 250GB minimum. What HDD you have that it makes a lot of noise? My is nice and quiet, and I does't hear any vibration, but this is thanks to mounting for hard drives.
Click to expand...
I have an old WD Green 750GB HDD. It's probably going too heaven as well. I secretly hope it dies so I can get a refund... Oh god I regret buying such a slow HDD.
 
Hello again lovely people. The name "Carbonized Blue" isn't really attractive... I could need some help with a new name for the build but I'm not very good with names, so help is appreciated :)
The last layer of paint have hopefully dryed soon. I'll show results tomorrow.
 
VegardBS said:
Hello again lovely people. The name "Carbonized Blue" isn't really attractive... I could need some help with a new name for the build but I'm not very good with names, so help is appreciated :)
The last layer of paint have hopefully dryed soon. I'll show results tomorrow.
Click to expand...

I think that once you finish your build it will be easier to pick the name for it:)
 
The paintwork is done for now... I was happy with the finish, but it could have been better.

gp26S56.jpg


AFGq6cS.jpg


cz1tpqP.jpg


oERwVX2.jpg
 
Last edited:
Lystfiskern said:
Dont sell yourself short - nothing wrong with this build.
Click to expand...

+1.

Besides, it's hard to judge a build when it's not finished yet as faults can still be corrected,
or imperfections worked out.

So: Keep up the good work. Personally, I'm liking what I've seen so far :)

EDIT: I saw your question in the Arctic Water build log about whether or not to cover
the Sabertooth in carbon fibre vinyl. Personally I would vote no on that. I think carbon fibre is
sort of tacky when it's used on large surfaces, plus I've always been bothered a bit when
something that's not carbon fibre is made to look like CF. But if you like it then there's
nothing stopping you, it's your build after all, and you can never please everyone anyway.
 
Last edited:
You must log in or register to reply here.

Similar threads

AlienALX
The Fairchild Ghost subwoofer project
2
Replies
35
Views
595
AlienALX
AlienALX
AlienALX
Building my dream N64. More in depth than you would think (and me !)
Replies
11
Views
1K
AlienALX
AlienALX
F
PC Refresh with Phanteks NV7
Replies
17
Views
4K
robbiec
R
R
Pondering swapping to hardline
Replies
9
Views
13K
Warchild
W
D
Gaming Rig
Replies
5
Views
3K
Deceit
D
Back
Top