sometimes I really wonder..

deepfried

New member
Well, I've just encountered perhaps the most extreme example of poor quality workmanship.

Yesterday I was playing crysis on high settings for the first time thanks to my lovely new xfx card, when all of a sudden I heard a loud clunking noise inside my pc, and before I could hit the power switch, the whole system shut down, which I'm sure has happened to some of you and is a terrifying thing to happen, especially if you've invested in an expensive rig and lack the money to go replacing parts willy nilly.

When I opened my case (a tower), my CPU heatsink was hanging by a thread from my socket. Naturally I assumed the latch had failed, so imagine my surprise when it turned out my bog standard AMD coolers latch had, in fact, managed to rip off the little nubbin that the lock down mechanism attaches to.

Thankfully I was able to find the bit that broke off, and when I checked it out, it was very obvious it had broken off because of a massive bubble within the plastic.

Now, yes, some may argue that it's an extremely rare sort of error, and can be blaimed on a random error during fabrication, but it really annoyed me for the following reason.

Let's look at it this way: If you have an upright case, your cpu is at the top of the board, and attached to it is a big, heavy, sharp edged lump of solid metal. Beneath that is your northbridge, your GPU and various other delicate pieces of expensive technology.

So I ask you this. why, oh WHY would a company associated with good products (gigabyte), suddenly decide it's okay not to run quality standard checks on the ONE part on their board that stops EXACTLY this kind of rig killing scenario happening?

Several hours later, half a tube of superglue, a heat lamp, and 2 fused fingers later, my rig is back to normal, but due to the now unstable nature of my rig, I've had to attach a low profile, lightweight cooler to the board, and bosh on a mack off fan just to get my rig to its previously respectable 40C idle overclocked temp.

Anyone ever had one of these stupid, needless errors before? I'm sure you've got your own examples, so please share!:wavey:
 
Intel Xeon retention clip, made from a metal btw, snapped whilst trying to unclip it.

Really don't understand why they make these things either tricky or shoddy or vary so much socket to socket.

.. well I do, so u have to spend cash.
 
Indeed Rast, I forgot the correct term for it, but we can only assume that.

I also find it odd that just as they introduce replacable socket bases, they all start breaking, which in itself is more than a little suspect.
 
This is why I always try my hardest to find a heatsink which screws on using the four holes around the socket. Problem solved. :)
 
Just for saftey's sake you can replace that hold down bracket dude, should just unscrew and mods decent retailers & ebay will have replacements for a few quid.

just do an ebay search for am2 retention bracket
 
Once found my stock fan (not current one) half fallen off.

Top two pins had come off and had the fan hanging by the bottom two. Still a wonder how the PC didn't start over heating.
 
Yeah I suppose in order to avoid issues like this they'd actually need to x-ray each of the retention brackets to make sure that there was no issues during the injection molding (or whatever they use) process. Most likely far too costly compared to having someone just perform a visual check.

All retention systems ever invented by both AMD and Intel have been crap imo. Best to just bolt thru as Tox said.
 
Set size, 4 posts in the mobo, taking 4 sprung screws, same positions as say a standard, ALL manufacturers.

1 type of cooler bracket required.

No question of am2/939/775, it just fits.

Concentrate on the cooler rather than squeazing more cash out of the user by moving the holes.
 
name='tinytomlogan' said:
Just for saftey's sake you can replace that hold down bracket dude, should just unscrew and mods decent retailers & ebay will have replacements for a few quid.

just do an ebay search for am2 retention bracket

Aye, I'm going to do just that. Besides which, My rigs now lying on its side and I've set a shutdown temp of 60c.

The superglue was just to keep it running as well as possible until I find a replacement socket.

On the other hand, I might just buy a new mobo, as this one has had a host of errors since I bought the damn thing.
 
name='Rastalovich' said:
Set size, 4 posts in the mobo, taking 4 sprung screws, same positions as say a standard, ALL manufacturers.

1 type of cooler bracket required.

No question of am2/939/775, it just fits.

Concentrate on the cooler rather than squeazing more cash out of the user by moving the holes.

yeh

most of the time they didnt need to move the holes other than to squeeze more cash

they should follow the trend new mobile phone chargers are doing, having a universal fitting and concentrate on improvements whether it be to the cooling or to the actual chip
 
Well, it's done, ended up buying a new bracket off ebay from hong kong for a fiver all included, cheapest I could get. Not happy that a piece of damn plastic Is so expensive, but then again this replacement is made of much higher density material so hopefully shouldn't break.
 
Back
Top