quick and simple, would you guys be comfortable running this gear on these rads

ruthless_villain

New member
hi guys, so i have a 60mm thick 480mm radiator, 35mm thick 360mm radiator and a 30mm thick 240mm radiator... im planning on using enermax clusters on all of the radiators. so here is what i am cooling 2 x gtx 480s, 2600k and my motherboard. i dunno if i have enough radiators to turn the fans really low. so do you guys think that it will be fine? or should i swap the 30mm thick 240mm radiator out for a 60mm/80mm thick alphacool?
 
I think you have more then enough rad surface for ya setup , running the fans on low speed will not cause any problem here imo .
 
what are the radiators manufacturer and model?
if you are running high 20+ FPI, the cluster is a lil timid on static pressure @ 12v.
like the GTX/stealth rads. the "looser" fin per inch would be a better alternatative
with all the surface area. the 480 and 360 will easily cover the hardware and the
240 (if used) can be used as headroom if in a high ambient situation or fan fail.
only your testing can really determine how low the fan speed can go without
excessive heat...

airdeano
 
what are the radiators manufacturer and model?
if you are running high 20+ FPI, the cluster is a lil timid on static pressure @ 12v.
like the GTX/stealth rads. the "looser" fin per inch would be a better alternatative
with all the surface area. the 480 and 360 will easily cover the hardware and the
240 (if used) can be used as headroom if in a high ambient situation or fan fail.
only your testing can really determine how low the fan speed can go without
excessive heat...

airdeano


+1

Airdeano is pretty much on the money.
 
A 360 and a 240 would be fine IMHO.

Quiet will always mean warmer temps, its just a ballencing act.

Even under water CPU's will still get hot (60 - 70+) when pushed hard but thats the point.
 
Back
Top