IMCustoms
New member
Bitspower RAM Block Unboxing and Mounting Tutorial is UP ! 
https://www.youtube.com/watch?v=Ndo048Usn6M
https://www.youtube.com/watch?v=Ndo048Usn6M
Project Ultima [Build log]
- Thread starter IMCustoms
- Start date
IMCustoms
New member
IMCustoms
New member
A little update:
I've been a bit busy so I delayed editing my final unboxing/tutorial video, but it's coming in a day or two (I hope so)
And I sent Bitspower's fittings back and I'm waiting for new ones, so I'm now test fitting and final measuring everything before assembling
And I want to say THANKS to all of you supporting me!
IMCustoms reached first 2 milestones,
Facebook Page: https://www.facebook.com/IMCustoms
Got more than 100Likes
Youtube Channel: https://www.youtube.com/user/IMCustomsIgor
Got more than 1000views
And also I want to invite everyone that still don't know about those stuff to join and check them out
I've been a bit busy so I delayed editing my final unboxing/tutorial video, but it's coming in a day or two (I hope so)
And I sent Bitspower's fittings back and I'm waiting for new ones, so I'm now test fitting and final measuring everything before assembling
And I want to say THANKS to all of you supporting me!
IMCustoms reached first 2 milestones,
Facebook Page: https://www.facebook.com/IMCustoms
Got more than 100Likes
Youtube Channel: https://www.youtube.com/user/IMCustomsIgor
Got more than 1000views
And also I want to invite everyone that still don't know about those stuff to join and check them out
IMCustoms
New member
Sorry guys for no updates for a while.. I was quite a bit sick.. Got some stomach flu and than a regular flu.. Shitty stuff all around..
But I'm better now, and let's get this ball rolling again!
Update:
I've entered this mod in Cooler Master Mod Competition 2015, and you can show your support there as well: http://goo.gl/WQdj1Q
Bitspower was finally sent me (I hope) the right fittings and not some prototypes again And also, I will do a review of one of their upcoming products, and I hope many more later
Everything is remeasured and prepared for some heavy wood and wall work, and I'll start chopping in the next few days
I've also finished my final EK motherboard block video, which will be rendering overnight and uploaded tomorrow and here is a shot of that
And that's all for now, cya a bit later when this video gets uploaded
But I'm better now, and let's get this ball rolling again!
Update:
I've entered this mod in Cooler Master Mod Competition 2015, and you can show your support there as well: http://goo.gl/WQdj1Q
Bitspower was finally sent me (I hope) the right fittings and not some prototypes again
And also, I will do a review of one of their upcoming products, and I hope many more later Everything is remeasured and prepared for some heavy wood and wall work, and I'll start chopping in the next few days
I've also finished my final EK motherboard block video, which will be rendering overnight and uploaded tomorrow
and here is a shot of that And that's all for now, cya a bit later when this video gets uploaded
IMCustoms
New member
And here it is, Unboxing and Mounting tutorial of EK-FB GA G1.Sniper 5 - Acetal+Nickel
https://www.youtube.com/watch?v=BjHEAw0nJH0
https://www.youtube.com/watch?v=BjHEAw0nJH0
IMCustoms
New member
Some of you on the forums and some sponsors have asked did I do some "actual" work, so today I took some time to prebuild the system on the floor, just so you all can see the layout and to test-fit everything, and to check out my computer measurements with the things I already built
Also I've done some tube bending, but I'm waiting for BP fittings to arrive to finish that.. And you can also see some types of screws, nuts, bolts and washers that I'll use to mount this beast to the wall
Also I've done some tube bending, but I'm waiting for BP fittings to arrive to finish that.. And you can also see some types of screws, nuts, bolts and washers that I'll use to mount this beast to the wall
IMCustoms
New member
So, today I made a couple of things..
Firstly I drilled holes in "main board" (that's how I'll call it from now on) for motherboard standoffs and 4 SSD's.. For now I have only 2 SSD's, but I'll contact a couple of manufactures to see if they can contribute for 2 more, or 4 new ones
Also, SSD's will be easily removable, cause I'll pre-attach these bolts and plexiglass (later about that) on SSD, and then just slide it into these holes, and bolt heads will get stuck and it won't be able to fall out, but just as a precaution I will probably put some velcro or double sided tape too.
Then I test fitted everything and made this plexi cutout for cable extenders, and you'll see later how I'll implement them
Firstly I drilled holes in "main board" (that's how I'll call it from now on) for motherboard standoffs and 4 SSD's.. For now I have only 2 SSD's, but I'll contact a couple of manufactures to see if they can contribute for 2 more, or 4 new ones
Also, SSD's will be easily removable, cause I'll pre-attach these bolts and plexiglass (later about that) on SSD, and then just slide it into these holes, and bolt heads will get stuck and it won't be able to fall out, but just as a precaution I will probably put some velcro or double sided tape too.
Then I test fitted everything and made this plexi cutout for cable extenders, and you'll see later how I'll implement them
IMCustoms
New member
Hey guys, new update !
The last part of Bitspower parts has finally arrived and those problematic fittings are much better now.. So in a last couple of days, I took the time to test them, decide where and how everything will fit and test-fit everything, and bagged and tagged it
Also, I almost finished marking everything up for cutting and I only need to design 1 more plexi panel and finalize the design of reservoirs.. And I hit the problem with those 3 big curved plexi covers, cause apparently no-one in my country can curve plexiglass in that radius, but only in strait 90 degree angle.. blahh.. So yeah, I will probably have to change my design a bit, but I don't think you will be disappointed with what I came up with
And here are a few shots
The last part of Bitspower parts has finally arrived and those problematic fittings are much better now.. So in a last couple of days, I took the time to test them, decide where and how everything will fit and test-fit everything, and bagged and tagged it
Also, I almost finished marking everything up for cutting and I only need to design 1 more plexi panel and finalize the design of reservoirs.. And I hit the problem with those 3 big curved plexi covers, cause apparently no-one in my country can curve plexiglass in that radius, but only in strait 90 degree angle.. blahh.. So yeah, I will probably have to change my design a bit, but I don't think you will be disappointed with what I came up with
And here are a few shots
IMCustoms
New member
@Bartacus, This is also my first time.. It's not that hard with Bitspower tubing if you follow these two steps: heat it slowly > bend
And that's really it (if you are doing just 1 angle bend), double bends are a bit tougher when they are so close together like there
Thanks @Feronix
And that's really it (if you are doing just 1 angle bend), double bends are a bit tougher when they are so close together like there
Thanks @Feronix
What brand/where can I buy this fan splitter?
Looking great so far. Waiting for more updates.
IMCustoms
New member
I started working on the project and forgot to make a Serbian version of motherboard block unboxing and mounting video... Where it finally is
https://www.youtube.com/watch?v=SAhzZRraVRA
https://www.youtube.com/watch?v=SAhzZRraVRA
