Project : Toxicity - Completed! 13/11
- Thread starter craigr1982
- Start date
craigr1982
New member
So I picked up some smaller SATA leads from Ebay seller SATA CITY. Brilliant seller, very fast to deliver and free postage too!
Anyway I got some 15cm, 25cm and 50cm cables which suit me down to the ground.
Much better than having to try and cable manage 30cm of cable for each hard drive.
I've been short on time recently so only really had time to do small items towards the project.
Here's a new video which pretty much brings you up to speed. Don't forget it's 720p over on Youtube
http://www.youtube.com/watch?v=IUubIh_H-yw
Still got the side panels to do but I can see the light at the end of the tunnel...(and it's GREEN
)
I'll be hoping for one more day of nice weather when it's all done so I can get some good outdoor photos and then I'll overload your bandwidth with them haha.
Anyway I got some 15cm, 25cm and 50cm cables which suit me down to the ground.
Much better than having to try and cable manage 30cm of cable for each hard drive.
I've been short on time recently so only really had time to do small items towards the project.
Here's a new video which pretty much brings you up to speed. Don't forget it's 720p over on Youtube
http://www.youtube.com/watch?v=IUubIh_H-yw
Still got the side panels to do but I can see the light at the end of the tunnel...(and it's GREEN
I'll be hoping for one more day of nice weather when it's all done so I can get some good outdoor photos and then I'll overload your bandwidth with them haha.
thestepster
New member
awsome work again man envious of ur case ha ha
craigr1982
New member
Cheers folks
I'm hoping I can do it justice when I come to photograph it.
I'm hoping I can do it justice when I come to photograph it.
craigr1982
New member
Well the weather never improved so I had to resort to some indoor photos.
I do still have the side panels to work on so these are mostly just internal shots for your viewing pleasure.
I'm holding off with the roof panel until the sides are done..Wouldn't want to spoil you now would I.
I do still have the side panels to work on so these are mostly just internal shots for your viewing pleasure.
I'm holding off with the roof panel until the sides are done..Wouldn't want to spoil you now would I.
thestepster
New member
looks awsome mate and i gotta say i really like the braiding over the hose man nice touch there
craigr1982
New member
Cheers stepster
thestepster
New member
yeah really makes it all fit in with the cable braiding, plus ive had that mobo but mines had the p5k premium bios and cooling on it was an utterly stonking board
craigr1982
New member
yeh its an ace board. had my q6600 from new up in the 3.8ghz up until a few months back (but im pretty sure its the chip.) I'm looking forward to bumping up my q9450 on it, its been a while since I was overclocking.
thestepster
New member
yeah cant wait to see what kinda results u get with a q9450 mate
craigr1982
New member
Under Load? using HWMonitor I got these temps.
Idle -
CPU - 18C - 22C (across 4 cores)
GPU - 39C
Full load - 2x orthos + furmark
CPU - 35C - 42C
GPU - 45C
yeah cant wait to see what kinda results u get with a q9450 mate
Well I just had a quick blast and now it's running at 3.4ghz. Stable for over 30mins with orthos. I'll try and tweak some more out of it another day.
The green machine, i love it bro
Glad you like it
craigr1982
New member
Hoping to get some work done to the side panels over the next couple of days, but brrrrr it's cold out.
thestepster
New member
nice temps mate!
yeah its got brutal cold here aswell mate we were minus 4 last night
yeah its got brutal cold here aswell mate we were minus 4 last night
craigr1982
New member
I can't believe how long it's been since I was here. Work has really taken it's toll on me..
I'll have a small update up in the next few days but in the meantime.
I've been featured on another blog site by Ron Leec (doing the Biohazard Scratchbuild)
http://www.bluehorsestudios.blogspot.com/
Woot !
I'll have a small update up in the next few days but in the meantime.
I've been featured on another blog site by Ron Leec (doing the Biohazard Scratchbuild)
http://www.bluehorsestudios.blogspot.com/
Woot !
craigr1982
New member
Cheers Steve
So another new update based solely on the side panels. It's a bit shorter than my usual videos, but then most of it is covering old ground, cutting and painting etc.
http://www.youtube.com/watch?v=zcGaS0JObLc
Now that the side panels are finished I just need to get some good photos of it completed and running.
With the weather closing in it makes it difficult to take photos outside and I don't really have the space for a full on photo booth in the house..
Have to see how it comes out.
craigr1982
New member
COMPLETED!!
Yes it's done, and here are the photos to prove it
Also a video showing the case "in the flesh" so to speak. Don't forget it's available in 720p as with all the other worklog videos.
http://www.youtube.com/watch?v=e8Wx77npSMg
Here are the specs.
Toxicity -
Asus P5KE-WiFi
Intel Q9450 @ 3.52Ghz
XFX GTX275
4Gb Kingston 1066 DDR2
60Gb OCZ Vertex 2 SSD
2x 1Tb HDD
G15 Keyboard
G9x Laser Mouse
Watercooled with
D-Tek Fusion V2 block
EK GTX275 waterblock
Swiftech MCP655 (Laing D5 Vario)
Custom Reservoir
Yes it's done, and here are the photos to prove it
Also a video showing the case "in the flesh" so to speak. Don't forget it's available in 720p as with all the other worklog videos.
http://www.youtube.com/watch?v=e8Wx77npSMg
Here are the specs.
Toxicity -
Asus P5KE-WiFi
Intel Q9450 @ 3.52Ghz
XFX GTX275
4Gb Kingston 1066 DDR2
60Gb OCZ Vertex 2 SSD
2x 1Tb HDD
G15 Keyboard
G9x Laser Mouse
Watercooled with
D-Tek Fusion V2 block
EK GTX275 waterblock
Swiftech MCP655 (Laing D5 Vario)
Custom Reservoir
