problem to increase multiplier of QX9770

[refaelo]

Hi all

I try to increase the multiplier of the QX9770 , but when I set it to 11 or above ,

the bios stuck and I get the massege " core to bus or cpu vid configuration error " , I dont know what the problem or what I do wrong , I am try to set the fsb to 200Mhz but its not help , now it set to 9 X 485

please help

 

[°TheMadDutchDude°]

So you're going from 4.365GHz down to only 2.2GHz? Your BIOS is probably telling you this because of the VID is TO high. Put the volts down to stock and see if the problem goes away.

 

[refaelo]

I dont change the volts at all

 

[Rastalovich]

Name the mobo m8, it could be it needs a bios upgrade to understand what the qx9770 is all about.