D Dazboots New member Mar 1, 2006 #1 thinking about going back into pelting again. do u know if pelt blocks will run ok on x1900 cards. was going to get the dangerden blocks. do the x1900 have cold bug. managed to get my old x800 vivo bios flashed to 16 pipes and gpu to 650 by 640. thx in responce.
thinking about going back into pelting again. do u know if pelt blocks will run ok on x1900 cards. was going to get the dangerden blocks. do the x1900 have cold bug. managed to get my old x800 vivo bios flashed to 16 pipes and gpu to 650 by 640. thx in responce.
M Marvt74 New member Mar 1, 2006 #2 I imagine as long as its the new model of maze 4 with mounting holes they should be fine with the x1900. My only concern is whether space is available between the 2 cards after insulation/coldplate is used
I imagine as long as its the new model of maze 4 with mounting holes they should be fine with the x1900. My only concern is whether space is available between the 2 cards after insulation/coldplate is used
S stocky New member Mar 1, 2006 #3 Although difficult to source, you may be better off with the swiftech alternative if space is tight... What spec peltier system were you thinking of running?
Although difficult to source, you may be better off with the swiftech alternative if space is tight... What spec peltier system were you thinking of running?
B Baron_Greenback New member Mar 2, 2006 #4 remember my pelt set up daz with the block/pelt/cold plate it was prety deep and the 2 layers of insulation on the back
remember my pelt set up daz with the block/pelt/cold plate it was prety deep and the 2 layers of insulation on the back
S stocky New member Mar 2, 2006 #5 The Swiftech is a few mm less than the DD: The neoprene on the Swifty is actually a few mm above that of the core, so the difference between the two could be whether it fits or not!
The Swiftech is a few mm less than the DD: The neoprene on the Swifty is actually a few mm above that of the core, so the difference between the two could be whether it fits or not!
