Ok...just a little info on temps please

[maverik-sg1]

No if it says GT on the back then its a GT - the compressor used by Nventiv/ECT is usually used for r134 - take no notice, its r404a gas in there.

Good to know about BIOs flashing, although I said for FX60 compatability, I had no idea there was an issue with the latest nvidia cards. Right fix with wrong diagnosis lol.

Okay well firstly u gotta find a temp monitor for the asus board that reads negative temps - asus probe (I think) if the temp is negative then the probe reads 200+ degrees, take 260 off the value to get ur true temp it's not ideal but I don't knwo what else you can use otehr than ur BIOS.

Okay anything higher than +12 degs fully overclocked (benching) is not good.

Anything over +1 for everyday overclocking is not good - try to stay sub zero for everyday use.

Mav

 

[BOA279]

What's a good place that hosts pics? My case is a little over the top but hey I'm a modder by heart. Its not quick done yet as I am still looking for a few parts but you will get the idea. Its actually an old antec matrix case I used last year with a custom front...Its pretty pimp but still in the works. Tell me how to post pics here and I will. Thanks again.

 

[maverik-sg1]

www.imageshack.us

Just copy and paste the links into your post.

 

[BOA279]

THose are the temps the mach should read correct?

 

[BOA279]

give me a minute to take a few better pics...check in a minute.

 

[maverik-sg1]

THose are the temps the mach should read correct?

No the mach display will say somewhere between -35 & -45 - temps I quoted are for CPU monitoring (eitehr in the BIOS or by motherboard monitor or similar) - not the mach display temps.

Mav

 

[BOA279]

Well, now in the bios the temp hovers around -15....and that pretty much normal right?

 

[BOA279]

 

[K404]

more or less...if ya can get Speedfan that`ll show temps in windows and your I/L variation

K

Case lookin good! I got a similar case, but mine DEFINATELY doesnt line up with the Mach box LOL

 

[BOA279]

this is the binary front cover I made...keep in mind its not finished...will be lighted from behind (red)....silver grill is not visible under normal light (flash shows every flaw!) what do you think so far?

 

[BOA279]

 

[BOA279]

quick pic of the top....bet you cant find where the old dvd through the plexi mod was before

 

[BOA279]

Ok, here is an inside pic

 

[BOA279]

LAST ONE

 

[maverik-sg1]

Speedfan don't work with x32 boards, it cant decide which chip to read (NF4 or ULI southbridge) and crashes - unless there is a new revision out?).

Mav