NZXT Switch: Project Something

Ibanez81

New member
PAGE 3 FOR FINISHED BUILD
smile.png


Havnt quiet thought of a name for this yet but anyhoo, here goes!

So i recently purchased a Switch 810 from Corban ( Thanks again Great guy! )

First Thing i did when i got it home was strip it down for working on:

eSqip.jpg


So to start this thread off here is the first mod i have done & not the last either! Hope you like
biggrin.png


KdfXs.jpg


Ay3P8.jpg


8U6Cx.jpg


And fitted to the front panel:

4kBBJ.jpg


And then fitted onto the case to see how it looked:

jjZAR.jpg


vGAlz.jpg


Im quite happy with how it turned out! The next step is to fit some mesh to it and finish it off nicely!

Ive also got some custom colour braided cables coming from the States from a member on here to suit the rig perfect.

The Theme here will be White, Black & Blue.

Im still deciding on wether to paint all the mesh a Blue colour. A blue the same as my profile picture is what i had in mind!
wink.png


I also need a name for this as im planning on a few logos to suit and would like to stick the name of the rig on the front panel. All suggestions welcome!

Thats it for now folks!
 
Interesting to see you decided on a sheet of acrylic for the front panel, it looks pretty cool.

As for a name, are you planning to name it after something or just to make up the name from scratch?
 
just any Name that suits, doesnt have to be after anything.

The front panel is actually the stock panel you get, i used a router table on it to make the shape.
 
just any Name that suits, doesnt have to be after anything.

The front panel is actually the stock panel you get, i used a router table on it to make the shape.

Oh, well it looks good mate, some LED's should light it up real nice too.

What about the name: 'Project Barracuda'
 
Got a load of stuff coming from specialtech tomorrow.

Got some cathodes, need to solder/fit some Sleek switches into the case for them.

Going with Mayhems pastel on this. Might swap to Bitspower compression fittings, they dont look too bad i think.

Handy having every vinyl under the sun at my work so ive got a blue picked out which il use as an accent to the case in places.

Roll on the weekend!
 
This morning i cut the mesh for the front panel

Vm8XN.jpg


Which fitted nicely on top and inside the little ridge on the back of the panel

rDfIu.jpg


There was no need to fix the mesh down in anyway as the standoffs hold it in place nicely with no movement, which is great because it means it can just be taken in and out easily if need be!

iKolq.jpg


And fitted to the front panel

0Fwo0.jpg


PSzme.jpg


And the case as it is at the moment

MutgB.jpg


My next step is to work on the roof panel, or rather re-create the roof panel completely.

I may try and find something to black-out the mesh on the front panel without restricting the airflow too much, i think it would look neater, any idea's?

So far so good.
biggrin.png
 
Build is coming along nice, good to see all these Switch mods going on lately, TTL is doing one as well which sounds interesting
smile.png


To black out the mesh, and I now this might sound weired but i've seen it done before, use some thin black women's tights over the back of the mesh.
 
On the TTL FB, he made a post saying he had updated the info page, these are the specs
YJ9Cv.gif


Main Rig - "Inspire" - Coming soon

Asus Z9 PE-D8 Work Station

Intel E5-2687 Octo Core Xeon X2

Nvidia GTX680 X2

64GB Corsair Vengeance 1866Mhz 8x8GB 2x 32GB Kits

2x Corsair 480GB Force3 SSD's

Custom NZXT Switch 810

AX850W - Custom Alchemy Cables

XSPC Watercooling

Noctua NF-F12's

Asus Xonar D2X

3x Samsung T240 1920x1200 Monitors

Custom Keyboard & Mouse

Corsair SP2500's
 
Looking good so far Highlander, keep it up!

On the TTL FB, he made a post saying he had updated the info page and these are th specs
YJ9Cv.gif


Main Rig - "Inspire" - Coming soon

Asus Z9 PE-D8 Work Station

Intel E5-2687 Octo Core Xeon X2

Nvidia GTX680 X2

64GB Corsair Vengeance 1866Mhz 8x8GB 2x 32GB Kits

2x Corsair 480GB Force3 SSD's

Custom NZXT Switch 810

AX850W - Custom Alchemy Cables

XSPC Watercooling

Noctua NF-F12's

Asus Xonar D2X

3x Samsung T240 1920x1200 Monitors

Custom Keyboard & Mouse

Corsair SP2500's

Holy shit that's gonna be awesome
dribble.gif
 
Well, I did a bit more routering today but not sure if it was worth it or not.

Basically i cut an entirely new top plate out of white acrylic. The only downside i dont like (and i knew this before i started) is that its just a slightly different white compared to the moulded plastic NZXT white. And i also didnt think before i started because the lines are going differently to the front plate lol
banghead.gif


So im not sure wether i will use this or not :/

Its slightly larger at the right hand end if you noticed. This is so i can glue on clips so it actions exactly the same as the original top plate.

GfKBZ.jpg


66dUX.jpg


Bfaco.jpg


XQcQT.jpg


hMRap.jpg


I also started adding some blue around the front area, but im not sure about it yet, i might take it off and redo it a little better

vJl0K.jpg


Z6ynn.jpg
 
Yeah i did the same thing with mine and after making 3 new top panels i ended up modding the one that came with the case cus they just didnt quite look right. Also i think the lines look right that way. Yes they are not the same direction as the front panel but if you look pre mod they dont go in the same direction anyway.
 
Back
Top